DC/DC CONVERTERS
|
40W DC/DC
40 Watt
Wide input DC/DC conve rte rs
(5, 10)
INPUT
OUTPUT
VOLTAGE
MAX. OUTPUT
CURRENT
INPUT
TYPICAL
MODEL NUMBER
(3)
OVP
(2)
(4)
VOLTAGE
CURRENT
EFFICIENCY
METRIC INSERTS
IMPERIAL INSERTS
18-36VDC
18-36VDC
18-36VDC
5VDC
12VDC
15VDC
6.2VDC
15VDC
18VDC
8A
3.5A
2.15A
2.1A
80%
82%
82%
80%
80%
81%
83%
83%
81%
81%
NFC40-24S05-M
NFC40-24S12-M
NFC40-24S15-M
NFC40-24T05-12-M
NFC40-24T05-15-M
NFC40-48S05-M
NFC40-48S12-M
NFC40-48S15-M
NFC40-48T05-12-M
NFC40-48T05-15-M
NFC40-24S05
NFC40-24S12
2.8A
2.1A
NFC40-24S15
(6)
18-36VDC 5/±12VDC 6.2VDC/None
18-36VDC 5/±15VDC 6.2VDC/None
7.5/±0.75A
7.5/±0.75A
8A
2.15A
2.15A
1.1A
NFC40-24T05-12
(6)
NFC40-24T05-15
36-72VDC
36-72VDC
36-72VDC
5VDC
12VDC
15VDC
6.2VDC
15VDC
18VDC
NFC40-48S05
NFC40-48S12
NFC40-48S15
3.5A
1.05A
1.05A
1.1A
2.8A
(6)
36-72VDC 5/±12VDC 6.2VDC/None
36-72VDC 5/±15VDC 6.2VDC/None
7.5/±0.75A
7.5/±0.75A
NFC40-48T05-12
(6)
1.1A
NFC40-48T05-15
Notes
Mechanical notes
1
Total error band is defined at the static output regulation at 25°C, includ-
ing initial setting accuracy, line voltage within stated limits and load cur-
rent within stated limits.
A All pins are actual to within 0.010 inch (0.25mm) diameter.
B Tolerances:
Imperial
0.XX ± 0.02 inch
0.XXX ± 0.005 inch
0.X ± 0.5mm
2
3
Nominal input voltages are 24VDC and 48VDC.
Overvoltage protection threshold. Any main output overvoltage clamps
the output to a very low output voltage. A prolonged overvoltage
condition will cause the converter to fail.
Metric
0.XX ± 0.13mm
Unless otherwise specified.
C Metric dimensions in brackets, e.g. 1.250” (31.75mm).
D Copper tracks must not be routed under the four converter stand-offs.
4
5
Maximum value at full load, nominal input voltage.
For top-mounted heatsink option with Metric screws, add ‘-MX’ or ‘-MY’
to these model numbers. For side-mounted heatsink option, add ‘-ME’ or
‘-MS’ to the model number e.g. NFC40-48S05-MX.
For top-mounted heatsink option with Imperial screws, add ‘-1X’ or ‘-1Y’
to these model numbers. For side-mounted heatsink option, add ‘-1E’ or
‘-1S’ to the model number e.g. NFC40-48S05-1X.
For triple output units, common pins (5 and 8) should be connected
externally.
0.50 (12.7)
0.020 ± 0.010 (0.51 ± 0.25)
0.15 (3.8) Min.
0.4 (1.02) Dia. Typ.
6
7
8
1.900 ± 0.010
(48.26 ± 0.25)
Square
5
Output V1 must return to common 1 and outputs V2 and V3 to common 2
and 3 respectively in order to meet noise and regulation specifications.
The external trim function enables the tailoring of the output voltage to
the applications exact requirements. Adjustments within ±10% are
possible. On the triple output models the auxiliary output voltages (output
2 and 3) will vary proportionally to the main output.
An external filter capacitor is required for normal operation. The
capacitor should be capable of handling 1A/2A ripple current for 48V/24V
models. Artesyn suggests: Nippon Chemi-Con SXE series, 220µF/100V
for the NFC40-48xxx-M and the Nippon Chemi-Con LXF Series,
1500µF/50V for the NFC40-24xxx-M.
0.05 (1.3)
1.800
(45.72)
4
5
0.500 (12.700)
0.200 (5.080)
0.300 7.620
1
2
0.200 (5.08)
0.600
(15.24)
6
7
0.600
(15.24)
0.800
(20.32)
0.100
(2.54)
1.250
(31.75)
1.100
(27.94)
3
8
9
9
0.22 ± 0.03 (5.6±0.8) Dia. Stand-off (4 Places)
0.20 (5.10)
Metric: M3 Tap Thru. (4 Places) Designated with the
suffix '-M' at the end of the model number
2.20 (55.90)
Square
Imperial: #4-40 VNC-2B Tap. Thru. (4 places)
Designated without the suffix '-M' at the end of the
model number
10 Extended operating temperature range. To specify an NFC40 that
operates down to –40°C, add the suffix ‘4’ or ‘-4’ to the model number
e.g. NFC40-48S05-M4 or NFC40-48S05-4 for Metric and Imperial screw
measurements respectively.
ALL DIMENSIONS IN INCHES (mm)
11 Case temperature must not exceed +105°C. Curve may be extended or
restricted depending on available cooling.
Auxiliary Load Regulation
NFC40-XXT05-12-M
15
14
(6,7)
PIN CONNECTIONS
7.5
6.0
PIN NUMBER
SINGLE OUTPUT
+ Input
TRIPLE OUTPUT
+ Input
13
12
11
4.0
2.0
1
2
3
4
5
6
7
8
9
.50
– Input
– Input
0
200
400
600
750
OUTPUT CURRENT
Control
Control
No Connection
No Connection
No Connection
+ Output
+ Vout 2
Auxiliary Load Regulation
NFC40-XXT05-15-M
Common 2, 3
– Vout 3
18
17
16
7.5
+ Vout 1
6.0
15
14
13
4.0
2.0
Common
Common 1
Trim
.50
Trim
0
200
400
600
750
OUTPUT CURRENT
http://www.artesyn.com
PAGE 1 4 3
ARTESYN [ ARTESYN TECHNOLOGIES ]
