NLP150L Series
•
•
•
•
•
•
•
•
•
•
•
Single and triple outputs
1
LOW TO MEDIUM POWER AC/DC POWER SUPPLIES 110-150W AC/DC Universal Input Switch Mode Power Supplies
90VAC to 264VAC universal input range
Provides low voltage outputs of 3.3V
EN61000-3-2 compliant
Overvoltage and short circuit protection
Power fail detection
Current sharing (on V
A
and V
B
)
3.8 x 6.8 x 1.26 inches
UL, CSA and VDE safety approvals and CE-marked to LVD
Compliance to EN55022-B conducted noise standard
Compliance to EN55022-A radiated noise standard
Meets all applicable and relevant immunity standards
EN61000-4-2, -3, -4, -5 and -6
The NLP150L series of 150 Watt AC/DC open frame power supplies are available with
single, triple or quad outputs. The single and triple output versions described in this
datasheet are housed in a 3.8 x 6.8 x 1.26 inch package. All NLP150L series power
supplies are harmonic current corrected to meet the EN61000-3-2 standard, and support
current sharing. The power supplies are designed for use in 1U shelves or boxes, and are
primarily intended for networking applications that have a heavy logic content, such as
access concentrators, midrange routers, LAN switches and shared media hubs.
All specifications are typical at nominal input, full load at 25°C unless otherwise stated
Patent No. 5600546 and 5652700
2 YEAR WARRANTY
SPECIFICATIONS
(11)
OUTPUT SPECIFICATIONS
Total regulation
(Line and load)
Turn-on delay
Transient response
Main output
Auxiliary outputs
@ 120VAC Input
Main output
75% to 100%
step at 0.1A/µs
±2.0%
±5.0%
2.0s, max.
5.0% or 250mV
max. dev., 1ms max.
recovery to 1%
±0.02%/°C
Main outputs
Cyclic operation
Singles and multiple
125%, ±10%
Continuous
See table
EMC CHARACTERISTICS (continued)
Surge
Fast transients
Radiated immunity
Conducted immunity
EN61000-4-5
EN61000-4-4
EN61000-4-3
EN61000-4-6
Level
Level
Level
Level
3
3
3
3
GENERAL SPECIFICATIONS
Hold-up time
Efficiency (See Note 13)
Isolation voltage
Approvals and
standards pending
Weight
120VAC @ 60Hz
120VAC @ 150W
Input/output
Input/chassis
20ms @ 150W
73% typical
3000VAC
1500VAC
Temperature coefficient
Overvoltage protection
Short circuit protection
Minimum output current
INPUT SPECIFICATIONS
Input voltage range
(See Note 12)
Input frequency range
Input surge current
Safety ground
leakage current
Input current
Input fuse
264VAC (cold start)
264VAC, 60Hz
120VAC @ 150W
230VAC @ 150W
UL/IEC127
(11)
EN60950, VDE0805, IEC950
UL1950, CSA C22.2 No. 950
540g (19oz)
MIL-HDBK-217F
Bellcore
(8)
Universal input
90 to 264VAC
47Hz to 63Hz
40A max.
0.99mA
1.95A rms
1.10A rms
F3.15A H, 250VAC
MTBF (@ 25°C)
350,000 hours min.
800,000 hours min.
ENVIRONMENTAL SPECIFICATIONS
Thermal performance
EMC CHARACTERISTICS
Conducted emissions
Radiated emissions
Harmonic current
emission correction
ESD air
ESD contact
Operating ambient,
0°C to +50°C
(See derating curve)
Non-operating
-40°C to +85°C
50°C to 70°C ambient,
Derate to
convection cooled
50% load
0°C to 50°C ambient,
110W
convection cooled
0°C to 50°C ambient,
150W
300LFM forced air
Peak (0°C to +50°C)
(See Note 3)
Non-condensing
Operating
Non-operating
5Hz to 500Hz
per MIL-STD-810E
5% to 95% RH
10,000 feet max.
30,000 feet max.
2.4G rms peak
516.4 Part IV
EN55022, FCC part 15
EN55022, FCC part 15
EN61000-3-2
EN61000-4-2
EN61000-4-2
Level B
Level A
Compliant
Level 3
Level 3
Relative humidity
Altitude
Vibration (See Note 6)
Shock
File Name: NLP150LST.PDF Rev: 24 June 2002
ARTESYN [ ARTESYN TECHNOLOGIES ]
