PM500CE SERIES
Single, dual and triple output
•
•
•
•
•
•
•
•
Encapsulated package
1 to 10.5W units
230VAC input (115VAC version, see PM500)
PCB mounting
Short circuit protection
EN55022, EN55011 conducted emissions level B
EN61000-4-2, -3, -4, -5, -6 immunity compliant
Meets
EN60950
[ 2 YEAR WARRANTY ]
The PM500CE series is an encapsulated, board mountable linear AC/DC power
module with the CE mark to demonstrate compliance with the Low Voltage
Directive for European applications. The series has single, dual and triple output
models with industry standard output configurations operating from an input
voltage of 230VAC making the PM500CE series suitable for a wide range of low
power PCB applications. The PM500CE series includes 1W to 10.5W modules.
Each module has short circuit protection and the 5V outputs also have
overvoltage protection. Conservative design and rating of these modules
results in reliable operation and long life. The PM500CE design is a low
emissions design with tightly regulated outputs making the series especially
suitable for test, measurement and instrumentation equipment.
SPECIFICATION
OUTPUT SPECIFICATIONS
Voltage accuracy
Voltage adjustability
Line regulation
Load regulation
Temperature coefficient
Overvoltage protection
(See Note 4)
Output power limit
Short circuit protection
All specifications are typical at nominal input, full load at 25°C unless otherwise stated
EMC CHARACTERISTICS
±1.0% max.
Yes
See table
See table
±0.02%/°C
GENERAL SPECIFICATIONS
Conducted emissions
Radiated emissions
ESD air
ESD contact
Surge
Fast transients
Radiated immunity
Conducted immunity
EN55022
EN55022
EN61000-4-2,
EN61000-4-2,
EN61000-4-5,
EN61000-4-4,
EN61000-4-3,
EN61000-4-6,
Level B
Level B
criteria 1
criteria 1
criteria 1
criteria 1
criteria 1
criteria 1
level
level
level
level
level
level
3
4
3
3
3
3
Perf.
Perf.
Perf.
Perf.
Perf.
Perf.
5V outputs only
Typical
Switch off/on
6.2V typical
Efficiency
130% to 200% FL
100% to 200% FL
Isolation voltage
Isolation capacitance
Approvals and
standards
230VAC ±10%
Case material
UL94V-0
Case B1
Case B2
Case B3
47Hz to 400Hz
<3.5mA @ 50Hz
Weight
(See Note 5)
40% typical
3000VAC
50pF
Meets EN60950
Non-conductive
black plastic
340g (12oz)
408g (14.4oz)
635g (22.4oz)
710,000 hours
INPUT SPECIFICATIONS
Input voltage range
Input frequency range
Safety ground
leakage current
(See Note 2)
MTBF (See Note 3)
ENVIRONMENTAL SPECIFICATIONS
Thermal performance
Operating amb.
–25°C to +71°C
Non-operating amb. –25°C to +85°C
Derating, 50°C to 71°C
2.5%/°C
Cooling
Free-air convection
cooled
Non-condensing
20% to 95% RH
Relative Humidity
PAGE 88
ARTESYN [ ARTESYN TECHNOLOGIES ]
