PM800 SERIES
Single and dual output
•
•
•
•
•
•
Linear topology for low noise applications
Tight line and load regulation
Short circuit protection
Pi input filter
Six sided continuous shield
No derating
[ 2 YEAR WARRANTY ]
The PM800 Series is a comprehensive line of four single output and five dual
output DC/DC converters with output power from 10 to 12 Watts. These high
performance modules offer excellent regulation with low ripple and noise, and
are especially useful in applications where higher output power levels are
needed in a compact module. A Pi input filter in all models minimizes reflected
ripple current while also providing for input spike attenuation. Six sided
continuous shielding, also standard, gives EMI/RFI suppression. All models
feature output current limiting, short circuit protection and input/output isolation
to 500VDC. Other specifications include: line regulation of ±0.02%; load
regulation of ±0.05% for single output models and ±0.02% for dual output
models; and an output voltage accuracy of ±3.0%.
SPECIFICATION
OUTPUT SPECIFICATIONS
Voltage accuracy
Line regulation
Load regulation
Cross regulation
Ripple and noise
20MHz BW
All specifications are typical at nominal input, full load at 25°C unless otherwise stated
GENERAL SPECIFICATIONS
±3.0%
Efficiency
Isolation voltage
Switching frequency
Case material
UL94V-0
Single output
Dual output
65% typical
500VDC, min.
20kHz, min.
Non-conductive
black plastic
To negative output
To output common
227g (8oz)
Single output
Dual output
330,000 hours
233,000 hours
Line ±8.0%
NL to FL, single outputs
NL to NL, dual outputs
Balance - duals (max.)
Single output
Dual output
±0.02%
±0.05%
±0.02%
±0.5%
0.7mV rms typical,
50mV pk-pk max.
0.7mV rms typical,
35 mV pk-pk, max.
300mV
400mV
50mV
50mV
typ.,
typ.,
typ.,
typ.,
0.1µs
0.1µs
0.1µs
0.1µs
Shielding connection
Weight
MTBF
Transient response
Singles, NL to FL
Duals, FL to NL
Singles, NL to FL
Duals, FL to NL
ENVIRONMENTAL SPECIFICATIONS
Thermal performance
Operating ambient
–25°C to +71°C
Case
+90°C, max.
Non-operating amb. –40°C to +125°C
Derating
None required
Cooling
Free-air convection cooled
Non-condensing
20% to 95% RH
Temperature coefficient Single output
Dual output
Short circuit protection
Auto-restart,
max. 8 hours
±0.02%/°C, max.
±0.01%/°C, max.
130°C thermal
protection
INPUT SPECIFICATIONS
Input voltage range
Input filter
See Note 3
See table on facing page
Pi network
Relative humidity
PAGE 1
ARTESYN [ ARTESYN TECHNOLOGIES ]
