SIL06 Series
DC/DC CONVERTERS
•
•
•
•
•
•
•
•
•
•
Single output
1
NEW Product
6A Non-isolated DC/DC Converters
Ultra wide trim range 0.9V to 3.3V/5.0V
Current sink capability for termination application
Horizontal and vertical-mount options available
High power density design means reduced board space
requirement
Power good output signal (open collector)
Operating ambient temperature up to +80ºC with suitable
derating and forced air cooling
Remote ON/OFF (active high)
0A minimum load
Input under-voltage lockout
Over-current and short-circuit protection
The SIL06 Series is a new high density open frame non-isolated converter for space
sensitive applications. Each model has a wide input range (4.5 - 5.5VDC or 10.2 -
13.8VDC) and offer a wide 0.9 - 5V output voltage range with a 6A load. An external
resistor adjusts the output voltage from its pre-set value of 0.9V to any value up to the
5V maximum. Typical efficiencies for the models are 89% for the 5V input version and
91% for the 12V input version. The SIL06 series offers remote ON/OFF and over-
current protection as standard. With full international safety approval including
EN60950 and UL/cUL60950, the SIL06 reduces compliance costs and time to market.
All specifications are typical at nominal input, full load at 25°C unless otherwise stated
2 YEAR WARRANTY
SPECIFICATIONS
OUTPUT SPECIFICATIONS
Voltage adjustability
(See Note 7)
5V input models
12V input models
0.9V to 3.3V
0.9V to 5.0V
±2.5%
±0.2% max.
INPUT SPECIFICATIONS Contd.
Turn ON threshold
Turn OFF threshold
5Vin model
12Vin model
5Vin model
12Vin model
4.5V
9.0V
4.3V
7.5V
Output setpoint accuracy With 1.0% trim resistors
Line regulation
Load regulation
Min./max. load
Overshoot
(at turn on)
Undershoot
Ripple and noise
Transient response
(See Note 1)
5Hz to 20MHz (See Note 2)
Deviation
5V input models
12V input models
Low line to high line
Full load to min. load
GENERAL SPECIFICATIONS
±0.5% max.
Efficiency
0A/6A
Switching frequency
3.0% max.
1.0% max.
100mV max.
See table
Approvals and
standards (See Note 4)
Material flammability
Weight
MTBF
Representative model:
Fixed
200kHz
TÜV Product Service
IEC60950, UL/cUL60950
UL94V-0
9.3g (0.3oz)
MIL-HDBK-217F
1,307,257 hours
12V model @ 40ºC
100% load, ground benign
Bellcore 332
7, 562,142 hours
See table
75mV
150µs recovery to
within regulation band
INPUT SPECIFICATIONS
Input voltage range
Input current
Input current (max.)
(See Note 9)
Input reflected ripple
(See Note 2)
Remote ON/OFF
Logic compatibility
ON
OFF
Start-up time
(See Note 3)
Power up
Remote ON/OFF
5V input model
12V input model
No load
Remote OFF
5V input model
12V input model
5V input model
12V input model
4.5 to 5.5VDC
10.2 to 13.8VDC
50mA
5mA
5.1A @ Io max.
1.6A @ Io max.
52mA (pk-pk)
56mA (pk-pk)
Active high
>2.4VDC
<0.8VDC
<20ms
<20ms
ENVIRONMENTAL SPECIFICATIONS
Thermal performance
(See Note 10)
Altitude derating
(above sea level)
Operating ambient,
temperature
Non-operating
3,000m (9,843 ft)
10,000m (32,808 ft)
0°C to +80°C
-40°C to +125°C
20%
50%
File Name: SIL06.PDF Rev: 10 Dec 2002
ARTESYN [ ARTESYN TECHNOLOGIES ]
