SIL40C Series
DC-DC CONVERTERS
•
•
•
•
•
•
C Class Non-isolated
12 Vin single output
1
NEW Product
•
•
•
40 A current rating
Input voltage range: 10.2 Vdc to 13.8 Vdc
Output voltage range: 0.9 Vdc to 5.0 Vdc
Industry leading value
•
Cost optimized design
Excellent transient response
Output Voltage adjustability
•
Pathway for future upgrades
•
Supports silicon voltage migration
•
Resulting in reduced design-in and qualification time
Designed in reliability: MTBF of >4 million hours
per Telcordia SR-332
Current share
Available RoHS compliant
The SIL40C Series is a new high density open frame non-isolated converter for space-sensitive
applications. Each model has a wide input range (10.2 Vdc to 13.8 Vdc) and offer a wide
0.9 Vdc to 5.0 Vdc output voltage range with a 40 A load. An external resistor adjusts the
output voltage from its pre-set value of 0.9 V to any value up to 5 V. Typical efficiencies are
92% at full load conditions. The SIL40C series offers remote ON/OFF and overcurrent
protection as standard. With full international safety approval including EN60950 and
UL/cUL60950
, the SIL40C reduces compliance costs and time to market.
All specifications are typical at nominal input, full load at 25 °C unless otherwise stated
2 YEAR WARRANTY
SPECIFICATIONS
OUTPUT SPECIFICATIONS
Voltage adjustability
(See Note 5)
0.9-5.0 Vdc
±3.0%
±0.2% max.
±1.5% max.
0 A/40 A
At turn-on
At turn-off
(See Note 1)
Deviation
1.0% max.
100 mV max.
50 mV pk-pk
15 mV rms
75 mV
50 µs recovery to
within regulation band
GENERAL SPECIFICATIONS
Efficiency
Switching frequency
Approvals and
standards
Material flammability
Weight
MTBF
Telcordia SR-332,
method II @ 40 ºC
Fixed
(See Note 7)
See table
300 kHz typ.
TÜV Product Services
IEC60950, UL/cUL60950
UL94V-0
28.3 g (1.0 oz)
4,585,991 hours
Output setpoint accuracy 1.0% trim resistors
Line regulation
Load regulation
Min/max load
Overshoot
Undershoot
Ripple and noise
5 Hz to 20 MHz
Transient response
(See Note 2)
Low line to high line
Full load to min. load
ENVIRONMENTAL SPECIFICATIONS
Thermal performance
(See Note 10)
Operating ambient,
temperature
Non-operating
0 ºC to +80 ºC
-40 ºC to +125 ºC
INPUT SPECIFICATIONS
Input voltage range
Input current
Input current (max.)
Input reflected ripple
Remote ON/OFF
Logic compatibility
ON
OFF
Start-up time
(See Note 9)
Turn ON threshold
Turn OFF threshold
Power up
Remote ON/OFF
(See Note 4)
Minimum load
Remote OFF
10.2-13.8 Vdc
290 mA
30 mA
22 A max @ lo max
and Vin = 10.2 V
150 mA pk-pk
Active high
>2.4 Vdc
<0.8 Vdc
<30 ms
<30 ms
9.0 Vdc
7.6 Vdc
PROTECTION
Short-circuit
Overtemperature
RECOMMENDED SYSTEM CAPACITANCE
Input capacitance
Output capacitance
(See Note 11) 2 x 270 µF/20 mΩ esr max.
(See Note 11) 3 x 680 µF/10 mΩ esr max.
Foldback, non-latching
Hiccup, non-latching
International Safety Standard Approvals
UL/cUL CAN/CSA 22.2 No. E139421
UL60950 file No. E139421
TÜV Product Service (EN60950) Certificate No. B 03 08 19870 219
CB report and certificate to IEC60950
File Name: sil40c.pdf Rev (04): 16 Dec 2005