3
Measure hidden power waste through secure connections, simple measurement
methods, and detailed data capture.
Promises reliable measurement for power demand
requirements!
■
Select from a variety of data, including detailed and harmonics data for multiple circuits
★
To measure multiple systems simultaneously
A single unit can measure two three-phase, 3-wire systems. Further,
you can make individual clamp-on sensor and current range settings
for each system.
Also, in addition to performing simultaneous measurement for up to four systems (single-phase,
2-wire) with a common voltage, you can set the current range individually for each system. Setting
the most suitable current range for both large and small loads allows you to acquire more accurate
measurements.
★
When measurement accuracy is crucial
The addition of a vector display for viewing the connection status
completes the preparation required for measurement.
Have you ever experienced incorrect measurement results?
The most common cause of incorrect data is a faulty connection. With the
3169-
20/21
you can use
the vector display to check the phase, whether a connection is loose, or whether the clamp-on sensor
connection has been reversed.
Also, you are assured of proper connection when measuring the VT (PT)/CT terminals even if you
cannot see the line you are measuring.
Measurement for up to four
single-phase, 2-wire systems
Checking the connection on
the vector display
Accurate and reliable
results
Measurement for up to two
three-phase, 3-wire systems
Use the 9661 sensor
to measure a single
system
Use the 9669 sensor to
measure two systems
The basic settings are constantly displayed, allowing
you to measure with confidence.
During measurement, in addition to displaying the voltage and current ranges, and VT (PT) and CT
ratios for each system, the unit can also display items such as the measurement interval. Because
the basic settings are constantly visible, you can be confident of obtaining the correct measurement
results.
★
Capture facility data quickly
By using continuous processing to measure individual waveforms, you
can accurately measure data in a relatively short amount of time.
Use the desired measurement method to continuously measure the voltage, current, and power for
individual waveforms, enabling you to obtain accurate data in one second or less. Further, you can
record the maximum, minimum and average values.
★
Having trouble clamping onto thick power lines?
Using the FLEXIBLE CLAMP ON SENSOR 9667, you can measure
power lines that are up to 5000 A AC and up to 245 mm in diameter.
The
FLEXIBLE CLAMP ON SENSOR 9667
ability to measure power lines with good phase
characteristics carrying up to 5000 A AC and measuring up to 254 mm in diameter allows you to
measure the power for large current lines that were previously difficult to measure, such as trunk
lines at factories.
Range:
AC 500A/5000A
Power supply:
4
×
AAA alkaline batteries (LR03)
(continuous use:one week or longer)
or the
AC adapter 9445
-02/03
φ
254mm (10.0")
★
Simultaneous power and harmonics management
Use a single unit to simultaneously measure data for power and
harmonics.
All acquired data can be saved onto a PC card.
Power data (including demand data) and harmonics data can be simultaneously saved onto a
PC card or in the unit's internal memory. Further, data for all of the systems being measured
can be saved when measuring multiple circuits. Each of these two new unit's offers a
management system for power and harmonic quality.
★
Measure another device simultaneously
Using the external I/O function, you can obtain even more detailed
measurements for energy conservation.
In addition to measurement start/stop control through external input, you can use this function to
output the measurement start/stop signal for the
3169-
20/21
. Simultaneous recording of a variety
of signals is also possible for equipment when using multiple devices to perform start control and
multi-channel recording.
Master control
Simultaneous
operation
Synchronous
with master
Simultaneous
control for signals
from equipment
3169
-20
▲
3169
-20
▲
MEMORY
▲
HiCORDER
▲
ASM-SENSOR [ ASM GMBH ]
