Output Specifications
R1K and 10V for WS position sensors
Excitation Voltage
32 VDC max. at 1 kW (input power 1 W max.)
1 kW ±10%
Voltage divider R1K
Potentiometer Impedance
Potentiometer
Thermal coefficient
Sensitivity
25 x 10-6/ °C full scale
Depends on measurement range, individual
sensitivity of sensor specified on label
Voltage Divider Utilization Range
Operating Temperature
Approx. 3% ... 97% of full range
-20 ... +85 °C
Signal diagram
+ Vin
+ Vout
GND
Note: The potentiometer must be connected
as a voltage divider. The input impedance of
the following processing circuit should be 10
MW min.
Excitation Voltage
Excitation Current
Output Voltage
Output Current
Output Load
+18 ... +27 V DC non stabilized
20 mA max.
Signal conditioner 10V
Voltage output
0 ... +10 V DC
2 mA max.
> 5 kW
Stability (Temperature)
Protection
50 x 10-6 / °C full scale
Reverse polarity, short circuit
0,5 mVRMS
Output Noise
Operating Temperature
EMC
-20 ... +85 °C
According to EN 61326:2004
Excitation +
Signal diagram
10V
Excitation GND
Signal +
0...10 V
Signal GND
Output signals
Connector
Signal Wiring
R1K
10V
Cable color
pin no.
+ Vin
GND
Excitation +
Excitation GND
Signal +
White
Brown
Green
Yellow
1
2
3
4
+ Vout
Signal GND
Connection
Mating Connector
View to solder
terminals
CONN-DIN-8F-W
CONN-M12-8F-G
ASM
CAT-WS-E-05
57
www.asm-sensor.com