Technical Reference Notes
AEQ15AF48 Series
(Dual Output Quarter Brick - Baseplate)
AEQ15AF48 - 5V/3.3V Dual Output DC-DC Converter Module
Industry Standard
¼
Brick w/ Baseplate: 36V-75V Input; 60W Output Power
The AEQ15 series is among Astec's dual output; high-density converter offering that comes in an industry standard ¼ brick
baseplate package. The AEQ15 series has been designed to deliver 60W of clean, well-regulated DC power for today's
demanding loads at high efficiency levels (89% typical for 30W/30W power split between rails). The 5V rail is capable of
delivering 12A max and the 3.3V rail is capable of delivering 15A max for a maximum output power of 60W. The module
comes with industry standard feature sets such as output enable with positive or negative logic options; input UVLO, output
trim, over current, over voltage and over temperature protection.
Electrical Parameters
Input
Input Range
Input Surge
Efficiency
36-75 VDC
100V / 100ms
89% (typ. at balanced load)
Control
Enable
TTL compatible
(Positive and Negative Enable Options)
Output
Load Current
5V @ 12A max
3.3V @ 15A max
60W Total Output Power
± 4% V
O
(5V)
± 3% V
O
(3V3)
80mV
PK-PK
max (5V output)
60mV
PK-PK
max (3.3V output)
±10% V
O,NOM
2% V
O
deviation (Typ)
50% to 75% Load Change
< 100µsec settling time (Typ)
120% I
O,MAX
Special Features
•
•
•
•
•
•
•
•
Industry Standard ¼ Brick Footprint with
Baseplate
High Efficiency @ 89% (60W full load)
Positive and Negative Logic Enable Options
High Capacitive Load Start-up
Fixed Switching Frequency for EMI
predictability
Output Trim
Input Under-Voltage Lockout
Basic insulation
Regulation (Typ)
Ripple and Noise
Output Voltage
Adjust Range
Transient Response
Over Current
Protection
Switching Frequency 360kHz
Environmental Specifications
•
•
•
-40ºC to 100ºC Base plate Temperature
-40ºC to 125ºC Storage Temperature
MTBF > 1 million hours
Safety
UL 1950, 3
rd
Edition
CSA C22.2 No 950-95
EN60950 through TUV-PS
MODEL: AEQ15AF48 SERIES
JUNE 16, 2003 - REVISION 01
SHEET 1 OF 15