欢迎访问ic37.com |
会员登录 免费注册
发布采购

AT24C32-10PC-2.5 参数 Datasheet PDF下载

AT24C32-10PC-2.5图片预览
型号: AT24C32-10PC-2.5
PDF下载: 下载PDF文件 查看货源
内容描述: 2线串行EEPROM [2-Wire Serial EEPROM]
分类和应用: 可编程只读存储器电动程控只读存储器电可擦编程只读存储器
文件页数/大小: 15 页 / 240 K
品牌: ATMEL [ ATMEL CORPORATION ]
 浏览型号AT24C32-10PC-2.5的Datasheet PDF文件第1页浏览型号AT24C32-10PC-2.5的Datasheet PDF文件第3页浏览型号AT24C32-10PC-2.5的Datasheet PDF文件第4页浏览型号AT24C32-10PC-2.5的Datasheet PDF文件第5页浏览型号AT24C32-10PC-2.5的Datasheet PDF文件第6页浏览型号AT24C32-10PC-2.5的Datasheet PDF文件第7页浏览型号AT24C32-10PC-2.5的Datasheet PDF文件第8页浏览型号AT24C32-10PC-2.5的Datasheet PDF文件第9页  
Absolute Maximum Ratings*
Operating Temperature .................................. -55°C to +125°C
Storage Temperature ..................................... -65°C to +150°C
Voltage on Any Pin
with Respect to Ground .....................................-1.0V to +7.0V
Maximum Operating Voltage........................................... 6.25V
DC Output Current........................................................ 5.0 mA
*NOTICE:
Stresses beyond those listed under “Absolute
Maximum Ratings” may cause permanent dam-
age to the device. This is a stress rating only and
functional operation of the device at these or any
other conditions beyond those indicated in the
operational sections of this specification is not
implied. Exposure to absolute maximum rating
conditions for extended periods may affect
device reliability.
Block Diagram
Pin Description
SERIAL CLOCK (SCL):
The SCL input is used to positive
edge clock data into each EEPROM device and negative
edge clock data out of each device.
SERIAL DATA (SDA):
The SDA pin is bidirectional for
serial data transfer. This pin is open-drain driven and may
be wire-ORed with any number of other open-drain or open
collector devices.
DEVICE/PAGE ADDRESSES (A2, A1, A0):
The A2, A1
and A0 pins are device address inputs that are hard wired
or left not connected for hardware compatibility with
AT24C16. When the pins are hardwired, as many as eight
32K/64K devices may be addressed on a single bus sys-
tem (device addressing is discussed in detail under the
Device Addressing section). When the pins are not hard-
wired, the default A
2
, A
1
, and A
0
are zero.
WRITE PROTECT (WP):
The write protect input, when tied
to GND, allows normal write operations. When WP is tied
high to V
CC
, all write operations to the upper quandrant
(8/16K bits) of memory are inhibited. If left unconnected,
WP is internally pulled down to GND.
Memory Organization
AT24C32/64, 32K/64K SERIAL EEPROM:
The 32K/64K is
internally organized as 256 pages of 32 bytes each. Ran-
dom word addressing requires a 12/13 bit data word
address.
2
AT24C32/64