A6010
XYYWWZ
A
A
SECTION A-A
Notes.
1. Dimensions in millimeters (inches)
2. Dimenstional tolerance: ±0.1 mm
3. Coplanarity of leads: 0.1 mm
4. Lead pitch tolerance: ±0.15 mm
5. Cummulative pitch tolerance. ±0.15 mm
6. Angular tolerance: ±3.0˚
7. Maximum flash +0.2 mm
8. Chamfer (25˚ x 2) on the taper side of the lead
Figure 8. Package outline drawing
CAUTION: It is advised that normal static precautions be taken in handling and assembly
of this component to prevent damage and/or degradation which may be induced by ESD
9