AMMP-5618
6–20 GHz General Purpose Amplifier
Data Sheet
Description
Avago’s AMMP-5618 is a high power, medium gain
amplifier that operates from 6 GHz to 20 GHz. The
amplifier is designed to be an easy-to-use component
for any surface mount PCB application. In
communication systems, it can be used as a LO buffer,
or as a transmit driver amplifier. During typical
operation with a single 5V supply, each gain stage is
biased for Class-A operation for optimal power output
with minimal distortion. The amplifier has integrated
50Ω I/O match, DC blocking, self-bias and choke to
eliminate complex tuning and assembly processes
typically required by hybrid (discrete-FET) amplifiers.
The package is fully SMT compatible with backside
grounding and I/O to simplify assembly.
Note: These devices are ESD sensitive. The following
precautions are strongly recommended. Ensure that
an ESD approved carrier is used when dice are
transported from one destination to another. Personal
grounding is to be worn at all times when handling
these devices.
Features
• 5 x 5 mm surface mount package
• Broad band performance 6–20 GHz
• High +19 dBm output power
• Medium 13 dB typical gain
• 50Ω input and output match
• Single 5V (107 mA) supply bias
Applications
• Microwave radio systems
• Satellite VSAT, DBS up/down link
• LMDS & Pt-Pt mmW long haul
• Broadband wireless access (including 802.16 and 802.20
WiMax)
• WLL and MMDS loops
• Commercial grade military
Absolute Maximum Ratings
[1]
Symbol
V
d
I
d
P
in
T
ch
T
stg
T
max
Parameters/Conditions
Positive Drain Voltage
Drain Current
CW Input Power
Operating Channel Temperature
Storage Case Temperature
Units
V
mA
dBm
°C
°C
Min.
Max.
7
150
20
+150
Vd
1
2
3
RFin 8
4 RFout
-65
+150
+300
7
6
5
Max. Assembly Temp (60 sec max)
°C
Note:
1. Operation in excess of any one of these conditions may result in
permanent damage to this device.
Attention:
Observe precautions for handling electrostatic
sensitive devices.
ESD Machine Model (Class A)
ESD Human Body Model (Class 0)
Refer to Avago Application Note A004R:
Electrostatic Discharge
Damage and Control.
AVAGO [ AVAGO TECHNOLOGIES LIMITED ]
