Versatile Link Printed Board Layout Dimensions
Horizontal Module
Vertical Module
7.62
(0.300)
2.54
(0.100)
1.01 (0.040) DIA.
4
TOP VIEW
3
2
1
7.62
(0.300)
PCB EDGE
5
6
1.85 MIN.
(0.073)
DIMENSIONS IN MILLIMETERS (INCHES).
Interlocked (Stacked) Assemblies
(refer to Figure 1)
Horizontal packages may be stacked by placing units
with pins facing upward. Initially engage the inter-
locking mechanism by sliding the L bracket body from
above into the L slot body of the lower package. Use a
straight edge, such as a ruler, to bring all stacked units
into uniform alignment. This technique prevents
potential harm that could occur to fingers and hands of
assemblers from the package pins. Stacked horizontal
packages can be disengaged if necessary. Repeated
stacking and unstacking causes no damage to individual
units.
To stack vertical packages, hold one unit in each hand,
with the pins facing away and the optical ports on the
bottom. Slide the L bracket unit into the L slot unit. The
straight edge used for horizontal package alignment is
not needed.
Stacking Horizontal Modules
Stacking Vertical Modules
Figure 1. Interlocked (stacked) horizontal or vertical packages
4
AVAGO [ AVAGO TECHNOLOGIES LIMITED ]
