HLMP-P106/P156
HLMP-Q102/Q152/Q106/Q156
Subminiature High Performance TS AlGaAs Red LED Lamps
Data Sheet
Description
Flat Top Package
The HLMP-Pxxx Series flat top lamps use an untinted,
non-diffused, truncated lens to provide a wide
radiation pattern that is necessary for use in
backlighting applications. The flat top lamps are also
ideal for use as emitters in light pipe applications.
Dome Packages
The HLMP-Qxxx Series dome lamps, for use as
indicators, use a tinted, diffused lens to provide a
wide viewing angle with high on-off contrast ratio.
High brightness lamps use an untinted, nondiffused
lens to provide a high luminous intensity within a
narrow radiation pattern.
Lead Configurations
All of these devices are made by encapsulating LED
chips on axial lead frames to form molded epoxy
subminiature lamp packages. A variety of package
configuration options is available. These include
special surface mount lead configurations, gull wing,
yoke lead, or Z-bend. Right angle lead bends at 2.54
mm (0.100 inch) and 5.08 mm (0.200 inch) center
spacing are available for through hole mounting. For
more information refer to Standard SMT and Through
Hole Lead Bend Options for Subminiature LED Lamps
data sheet.
Technology
These subminiature solid state lamps utilize a highly
optimized LED material technology, transparent
substrate aluminum gallium arsenide (TS AlGaAs).
This LED technology has a very high luminous
efficiency, capable of producing high light output
over a wide range of drive currents (500
µA
to 50
mA). The color is deep red at a dominant wavelength
of 644 nm deep red. TS AlGaAs is a flip-chip LED
technology, die attached to the anode lead and wire
bonded to the cathode lead. Available viewing angles
are 75° , 35° , and 15° .
Features
• Subminiature flat top package
Ideal for backlighting and light piping applications
• Subminiature dome package
Diffused dome for wide viewing angle
Non-diffused dome for high brightness
• Wide range of drive currents 500
µA
to 50 mA
• Ideal for space limited applications
• Axial leads
• Available with lead configurations for surface mount
and through hole PC board mounting
AVAGO [ AVAGO TECHNOLOGIES LIMITED ]
