END
START
Convective IR Reflow
Soldering
For more information on IR
reflow soldering, refer to
Application Note 1060, Surface
Mounting SMT LED Indicator
Components.
THERE SHALL BE A
MOUNTED ꢂITH
COMPONENTS
THERE SHALL BE A
MINIMUM OF 160 ꢁꢁ
(6.3 INCH) OF EMPTY
COMPONENT POCKETS
SEALED ꢂITH COVER
TAPE.
MINIMUM OF
230 ꢁꢁ
MINIMUM OF 160 ꢁꢁ
(6.3 INCH) OF EMPTY
COMPONENT POCKETS
SEALED ꢂITH COVER
TAPE.
Storage Condition:
5 to 30°C @ 60% RH max.
Baking is required under the
condition:
(9.05 INCH)
MAY CONSIST
OF CARRIER
AND/OR
COVER TAPE.
Figure 22. Tape leader and trailer dimensions.
a) Humidity Indicator Card is
>10% when read at 23 5°C
b) Device exposed to factory
conditions <30°C/60% RH
more than 672 hours.
NOTES:
1. ALL DIMENSIONS IN MILLIMETERS (INCHES).
2. TOLERANCE IS 0.1 ꢁꢁ ( 0.004 IN.) UNLESS OTHERꢂISE SPECIFIED.
Baking recommended condition:
60 5°C for 20 hours.
For product information and a complete list of distributors, please go to our website: www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies Limited in the United States and other countries.
Data subject to change. Copyright © 2008 Avago Technologies Limited. All rights reserved. Obsoletes AV01-0521EN
AV02-0977EN January 10, 2008