AZ2510
AZ
100 AMP LATCHING
POWER RELAY
FEATURES
100 Amp switching
Heavy loads to 24000 VA
4 kV dielectric
Meets 8 mm creepage
Mechanical position indicator which may be also used
for manual operation or to actuate a micro-switch
•
UL, CUR pending
•
•
•
•
•
CONTACTS
Arrangement
Ratings
SPST (1 Form A)
Resistive load:
Max. switched power: 3000 W, 24000 VA
Max. switched current: 100 A
Max. switched voltage: 30 VDC, 400 VAC
Rated Load
UL, CUR
Material
Resistance
100 A at 240 VAC, 10k cycles, Resistive
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Set and Reset
Pulse Duration
Set Time (typical)
Reset Time (typical)
Silver tin oxide
< 2 milliohms initially
(24 V, 1 A voltage drop method)
Dielectric Strength
4000 Vrms coil to contact
(at sea level for 1 min.)
2000 Vrms between open contacts
Insulation
Resistance
Creepage Distance
1000 megohms min. at 20°C, 500 VDC,
50% RH
8 mm
At nominal coil voltage
-40°C (-40°F) to 70°C (158°F)
-40°C (-40°F) to 105°C (221°F)
0.062" DA at 10–55 Hz
Minimum operations
1 x 10
6
1 x 10
4
at 100 A 240 VAC Res.
36 ms minimum
12 ms at nominal coil voltage
6 ms at nominal coil voltage
COIL
Power
At Pickup Voltage
(typical)
Temperature
1.44 W single coil
2.88 W dual coil
Max. 105°C (2221°F)
Ambient Temperature
Operating
Storage
Vibration
Shock
Operating
10 g, 11 ms,
1
/
2
sine (no false operation)
Non-Operating
100 g, 11 ms,
1
/
2
sine (no damage)
Enclosure
P.B.T. polyester
Tinned copper alloy
P. C. (coil), heavy tabs (power)
270°C (518°F)
5 seconds
82 grams
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
4. Allow suitable slack on leads when wiring, and do not subject the
terminals to excessive force.
Terminals
Max. Solder Temp.
Max. Solder Time
Weight
1/21/09W