AZ2800
30 AMP MINIATURE
POWER RELAY
FEATURES
•
•
•
•
•
•
30 Amp switching capability
DPST-NO and DPDT configuration
Meets 8 mm creepage, 4 kV dielectric
Meets Class F construction
Epoxy sealed versions available
UL, CUR file E44211, VDE 40023442
CONTACTS
GENERAL DATA
Arrangement
Ratings
DPST-N.O.
DPDT
Resistive load:
Max. switched power: 560 W or 8310 VA
Max. switched current:30 A N.O, 3 A N.C.
Max. switched voltage: 600 VAC or 30 VDC*
UL, CUR
N.O.
30 A at 277 VAC General Use, 100k cycles
1 Hp at 120 VAC, 100k cycles
2.5 Hp at 240 VAC, 100k cycles
110 LRA/25.3 FLA at 240 VAC (DC coils only),
30k cycles
Life Expectancy
Mechanical
Electrical
Operate Time
Release Time
Minimum operations
5 x 10
7
1 x 10
5
at 30 A 120 VAC Res. N.O.
15 ms typical
25 ms maximum with bounce
10 ms typical
25 ms maximum with bounce
(with no coil suppression)
UL, CUR
3 A at 277 VAC General Use, 100k cycles
N.C.
VDE
N.O. 20A 250VAC, N.C. 3A 250VAC
*Note: If switching voltage is greater than 30VDC,
special precautions must be taken. Please contact
the factory.
Dielectric Strength
1500 Vrms contact to contact
(at sea level for 1 min.)
4000 Vrms contact to coil
2000 Vrms between contact sets
Insulation Resistance
Dropout
Ambient Temperature
Operating
Storage
Vibration
Shock
10
9
ohms minimum at 500 VDC
DC: Greater than 10% of nominal coil voltage
AC: Greater than 20% of nominal coil voltage
At nominal coil voltage
DC: -40°C (-40°F) to 95°C (203°F)
AC: -40°C (-40°F) to 75°C (167°F)
-40°C (-40°F) to 155°C (311°F)
0.062" DA at 10–55 Hz
Operational, 10 g for 11 ms
1
/
2
sine pulse
(no contact opening > 100usec)
Non-destructive, 100 g for 11 ms
1
/
2
sine pulse
P.B.T. polyester
Quick connect tabs
Note: Allow suitable slack on leads when wiring,
and do not subject the terminals to excessive
force.
Material
Resistance
Silver cadmium oxide, silver tin oxide
<50 milliohms initially
(6 V, 1 A voltage drop method)
COIL
Power
At Pickup Voltage
(typical)
Max. Continuous
Dissipation
Temperature Rise
Temperature
DC: 0.925 W
AC: 2.6 VA
DC: 5.0 W at 20°C (68°F)
AC: 7.0 VA at 20°C (68°F)
DC: 48°C (86°F) at nominal coil voltage
AC: 68° C (122°F) at nominal coil voltage
Max. 155°C (311°F)
Max. Solvent Temp.
Max. Immersion Time
Weight
Enclosure
Terminals
80°C (176°F)
30 seconds
86 grams
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
3/3/08W
AZETTLER [ AMERICAN ZETTLER, INC. ]
