AZ6961
10 AMP SUBMINIATURE
POWER RELAY
FEATURES
•
•
•
•
•
•
High sensitivity, 120 mW pickup
Dielectric strength 5000 Vrms
Isolation spacing greater than 8 mm
10 Amp switching capability
Class B insulation standard, Class F version available
Epoxy sealed version for automatic wave soldering and
cleaning available
•
UL, CUR file E44211
•
VDE 131637ÜG
CONTACTS
Arrangement
Ratings
SPDT (1 Form C)
SPST (1 Form A)
Resistive load:
Max. switched power: 240 W or 2500 VA
Max. switched current: 10 A
Max. switched voltage: 240* VDC or 440 VAC
UL, CUR Rating:
10 A at 250 VAC resistive [1]
8 A at 30 VDC/250 VAC [1]
8 A at 30 VDC/250 VAC,
100k cycles [2]
B300 Pilot Duty [1]
R300 Pilot Duty [1]
1/4 HP at 125 VAC [1]
1/2 HP at 250 VAC [1]
VDE Rating:
8 A at 250 VAC
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Operate Time (typical)
Release Time (typical)
Minimum operations
10 million
3 X 10
5
at 8 A 240 VAC res.
7 ms at nominal coil voltage
3 ms at nominal coil voltage
(with no coil suppression)
Dielectric Strength
5000 Vrms coil to contact
(at sea level for 1 min.)
1000 Vrms between open contacts
Insulation
Resistance
Dropout
Ambient Temperature
Operating
Storage
Vibration
Shock
Enclosure
Terminals
Max. Solder Temp.
Max. Solder Time
1000 megohms min. at 20°C, 500 VDC,
50% RH
Greater than 10% of nominal coil voltage
At nominal coil voltage
-40°C (-40°F) to 100°C (212°F)
-40°C (-40°F) to 130°C (266°F) Class B
-40°C (-40°F) to 155°C (311°F) Class F
Break Contact: 5g at 10...500 Hz
Make Contact: 20g at 10...500 Hz
10 g
P.B.T. polyester, UL94 V-0
Tinned copper alloy, P.C.
270°C (518°F)
5 seconds
80°C (176°F)
30 seconds
8 grams
*Note: if switching voltage is greater than 30 VDC, special
precautions must be taken. Please contact the factory.
Material
Silver cadmium oxide (AgCdO) [1]
Silver tin oxide (AgSnO
2
) [2]
Gold plating available
< 100 milliohms initially
Resistance
COIL
Power
At Pickup Voltage
(typical)
Max. Continuous
Dissipation
Temperature Rise
Temperature
120 mW
1.2 W at 20°C (68°F) ambient
20°C (36°F) at nominal coil voltage
Max. 130°C (266°F) Class B
Max. 155°C (311°F) Class F
Max. Solvent Temp.
Max. Immersion Time
Weight
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
4. Class F version not VDE approved
2/17/05W