AZ697
10 AMP MINIATURE
POWER RELAY
FEATURES
•
•
•
•
•
•
•
•
Dielectric strength 5000 Vrms
Low cost
Epoxy sealed version available
10 Amp switching — single pole contacts
UL TV-5
Isolation spacing greater than 8mm
UL Class B insulation system, Class F available
UL, CUR file E44211; TÜV file R50129288
CONTACTS
Arrangement
Ratings
SPST (1 Form A)
SPDT (1 Form C)
Resistive load:
Max. switched power: 300 W or 2770 VA
Max. switched current: 10 A
Max. switched voltage: 150* VDC or 380 VAC
*
Note: If switching voltage is greater than 30 VDC, special
precautions must be taken. Please contact the factory.
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Operate Time (typical)
Release Time (typical)
Minimum operations
1 x 10
7
1 x 10
5
at 10 A 240 VAC Res.
8 ms at nominal coil voltage
5 ms at nominal coil voltage
(with no coil suppression)
Rated Load
UL, CUR
TV-5 at 120 VAC [1][2][3]
10 A at 277 VAC, General Use [1]
10 A 30 VDC, Resistive [1]
1
/
3
HP at 250 VAC [1]
1
/
4
HP at 125 VAC N.O. [1]
10 A at 277 VAC, General Use, 100k cycles [2][3]
10 A at 30 VDC, Resistive, 100k cycles [2][3]
1/3 HP at 250 VAC, 100k cycles [2][3]
1/4 HP at 125 VAC, 100k cycles [2][3]
10 A at 250 VAC, 30 VDC Resistive 100k cycles
[1][2]
10 A at 250 VAC, 30 VDC Resistive 50k cycles [3]
Silver cadmium oxide [1], silver nickel [2], silver tin
oxide [3], Gold plating available
< 50 milliohms initially
(24 V, 1 A voltage drop method)
Dielectric Strength
5000 Vrms coil to contact
(at sea level for 1 min.)
1000 Vrms between open contacts
Insulation
Resistance
Dropout
Ambient Temperature
Operating
Storage
1000 megohms min. at 20°C, 500 VDC
50% RH
Greater than 10% of nominal coil voltage
At nominal coil voltage
-40°C (-40°F) to 90°C (194°F) Class B
-40°C (-40°F) to 110°C (230°F) Class F
-40°C (-40°F) to 130°C (266°F) Class B
-40°C (-40°F) to 155°C (311°F) Class F
0.062" DA at 10–55 Hz
10 g
P.B.T. polyester
Tinned copper alloy, P. C.
270°C (518°F)
5 seconds
80°C (176°F)
30 seconds
18 grams
TÜV
Vibration
Shock
Enclosure
Material
Resistance
Terminals
Max. Solder Temp.
COIL
Power
At Pickup Voltage
(typical)
Max. Continuous
Dissipation
Temperature Rise
Temperature
257 mW
1.9 W at 20°C (68°F) ambient (Class B)
2.5 W at 20°C (68°F) ambient (Class F)
34° C (61°F) at nominal voltage
Max. 130°C (266°F) Class B
Max. 155° C (311° F) Class F
Max. Solder Time
Max. Solvent Temp.
Max. Immersion Time
Weight
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
4/9/09W
AZETTLER [ AMERICAN ZETTLER, INC. ]
