AZ6991
SENSITIVE
SUBMINIATURE RELAY
FEATURES
•
Extremely small footprint utilizing only 0.22 square inch
of PCB area
•
Thin vertical profile only 0.196" wide
•
6 Amp switching capability
•
High sensitivity, 95 mW pickup
•
Dielectric strength 4000 Vrms contact to coil
•
Coils to 60 VDC
•
Epoxy sealed version for wave soldering and cleaning
available
•
Isolation spacing greater than 8 mm
•
UL/CUR file E43203, VDE file 40020561
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Operate Time (typical)
Release Time (typical)
Dielectric Strength
(at sea level for 1 min.)
Minimum operations
10 million operations
3 X 10
4
at 6 A, 30 VDC or 250 VAC Res.
8 ms at nominal coil voltage
4 ms at nominal coil voltage
(with no coil suppression)
1000 Vrms between open contacts
4000 Vrms contact to coil
100 megohms min. at 20°C, 500 VDC,
50% RH
Greater than 10% of nominal coil voltage
At nominal coil voltage
-40°C (-40°F) to 85°C (158°F)
-40°C (-40°F) to 105°C (221°F)
0.062" DA 10–55 Hz
10 g
P.B.T. polyester 94V-0
Tinned copper alloy, P.C.
260°C (500°F)
5 seconds
80°C (176°F)
30 seconds
5.4 grams
CONTACTS
Arrangement
Ratings
SPST (1 Form A)
SPDT (1 Form C)
Resistive load:
Max. switched power: 180 W or 1662 VA
Max. switched current: 6 A
Max. switched voltage: 150* VDC or 400 VAC
Note: If switching voltage is greater than 30 VDC, special
precautions must be taken. Please contact the factory
.
Insulation
Resistance
Dropout
Ambient Temperature
Operating
Storage
Vibration
Rated Load
UL/CUR
VDE
6A at 277 VAC resistive
6A at 30 VDC resistive
R300 Pilot Duty
6A at 250 VAC resistive
6A at 30 VDC resistive
Silver nickel
Silver nickel with gold plating
Shock
Enclosure
Terminals
Max. Solder Temp.
Max. Solder Time
Max. Solvent Temp.
Material
COIL
Power
At Pickup Voltage
(typical)
Max. Continuous
Dissipation
Temperature Rise
Temperature
95 mW
1.0 W at 20°C (68°F) ambient
20°C (36°F) at nominal coil voltage
Max. 105°C (221°F)
Max. Immersion Time
Weight
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
8/10/06W
AZETTLER [ AMERICAN ZETTLER, INC. ]
