AZ733W
AZ
DPST MINIATURE
POWER RELAY
FEATURES
•
•
•
•
•
•
•
•
Dielectric strength 5000 Vrms
1.5 mm contact gap
Epoxy sealed version available
10 Amp switching — double pole contacts
Isolation spacing greater than 8 mm
UL Class B insulation system
UL, CUR file E44211
TÜV file R50129285
CONTACTS
Arrangement
Ratings
DPST (2 Form A)
Resistive load:
Max. switched power: 300 W or 2500 VA
Max. switched current: 10 A
Max. switched voltage: 150 VDC* or 400 VAC
*Note: If switching voltage is greater than 30 VDC, special
precautions must be taken. Please contact the factory.
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Minimum operations
5 x 10
5
1 x 10
5
at 10 A 240 VAC Res.
Operate Time (Typical)
10 ms at nominal coil voltage
Release Time (Typical)
4 ms at nominal coil voltage
(with no coil suppression)
Dielectric Strength
5000 Vrms contact to coil
(at sea level for 1 min.)
3000 Vrms between open contacts
3000 Vrms between contact sets
Insulation
Resistance
Dropout
Ambient Temperature
Operating
Storage
Vibration
Shock
1000 megohms min. at 20°C, 500 VDC,
50% RH
Greater than 10% of nominal coil voltage
at nominal coil voltage
-40°C (-40°F) to 80°C (176°F)
-40°C (-40°F) to 130°C (266°F)
0.062" DA at 10–55 Hz
10 g
P.B.T. polyester
Tinned copper alloy, P.C.
270°C (518°F)
5 seconds
80°C (176°F)
30 seconds
18 grams
Rated Load
UL, CUR
TÜV
10 A at 250 VAC General use, 100k cycles [1][2][3]
TV-3 at 125 VAC [1]
10 A at 30 VDC, 250 VAC resistive, 100k cycles [1]
[2][3]
[1] Silver cadmium oxide [2] Silver tin oxide [3]Silver
nickel
Silver cadmium oxide, silver tin oxide or silver
nickel, Gold plating available
< 50 milliohms initially
(24 V, 1 A voltage drop method)
Material
Resistance
COIL
Power
At Pickup Voltage
(typical)
Max. Continuous
Dissipation
Temperature Rise
Temperature
450 mW
Enclosure
Terminals
Max. Solder Temp.
Max. Solder Time
2.0 W at 20°C (68°F) ambient
40°C (83°F) at nominal coil voltage
Max. 130°C (266°F)
Max. Solvent Temp.
Max. Immersion Time
Weight
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
4/9/09W
AZETTLER [ AMERICAN ZETTLER, INC. ]
