AZ765
SPST SUBMINIATURE
POWER RELAY
FEATURES
•
•
•
•
•
Small footprint
Low cost
Epoxy sealed version available
10 Amp switching
UL, CUR file E44211
CONTACTS
Arrangement
Ratings
SPST (1 Form A)
Resistive load:
Max. switched power: 150 W or 1250 VA
Max. switched current: 10 A
Max. switched voltage: 30* VDC or 250 VAC
*
Note: If switching voltage is greater than 30 VDC, special
precautions must be taken. Please contact the factory.
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Operate Time (typical)
Release Time (typical)
Minimum operations
1 x 10
7
1 x 10
5
at 10 A 120 VAC Res.
8 ms at nominal coil voltage
5 ms at nominal coil voltage
(with no coil suppression)
Rated Load
UL, CUR
Material
Resistance
Dielectric Strength
2500 Vrms coil to contact
(at sea level for 1 min.)
1000 Vrms between open contacts
Insulation
Resistance
Dropout
Ambient Temperature
Operating
Storage
Vibration
Shock
1000 megohms min. at 20°C
500 VDC 50% RH
Greater than 5% of nominal coil voltage
At nominal coil voltage
-40°C (-40°F) to 65°C (149°F)
-40°C (-40°F) to 105°C (221°F)
0.040" DA at 10–50 Hz
10 g operating, 100 g damage
P.B.T. polyester
Tinned copper alloy, P. C.
270°C (518°F)
5 seconds
80°C (176°F)
30 seconds
6 grams
10 A at 125 VAC, 5A at 250 VAC
5 A at 30 VDC
Silver cadmium oxide
< 50 milliohms initially
(24 V, 1 A voltage drop method)
COIL
Power
At Pickup Voltage
(typical)
Max. Continuous
Dissipation
Temperature Rise
Temperature
253 mW
Enclosure
Terminals
Max. Solder Temp.
Max. Solder Time
1.1 W at 20°C (68°F) ambient
42°C (76°F) at nominal coil voltage
Max. 105°C (221°F)
Max. Solvent Temp.
Max. Immersion Time
Weight
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
12/11/08W