AZ766
AZ
SPST SUBMINIATURE
POWER RELAY
FEATURES
•
•
•
•
•
•
•
Small footprint
Low seated height
Low cost
Epoxy sealed version available
13.5 Amp switching
UL Class B insulation system
UL, CUR file E44211
CONTACTS
Arrangement
Ratings
SPST (1 Form A)
Resistive load:
Max. switched power: 300 W or 2770 VA
Max. switched current: 13.5 A
Max. switched voltage: 150* VDC or 400 VAC
*
Note: If switching voltage is greater than 30 VDC, special
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Operate Time (typical)
Release Time (typical)
Minimum operations
1 x 10
7
1 x 10
5
at 12 A 125 VAC Res.
8 ms at nominal coil voltage
5 ms at nominal coil voltage
(with no coil suppression)
precautions must be taken. Please contact the factory.
Rated Load
UL, CUR
13.5 A at 125 VAC
12 A at 125 VAC Gen. use 100 K cycles
10 A at 277 VAC / 30 VDC 100 K cycles
TV–5
1
/
4
HP, 125 VAC / 250 VAC
Dielectric Strength
2500 Vrms coil to contact
(at sea level for 1 min.)
1000 Vrms between open contacts
Insulation
Resistance
Dropout
Ambient Temperature
Operating
Storage
Vibration
1000 megohms min. at 20°C
500 VDC 50% RH
Greater than 5% of nominal coil voltage
At nominal coil voltage
-40°C (-40°F) to 85°C (188°F)
-40°C (-40°F) to 130°C (266°F)
0.040" DA at 10–50 Hz
10 g operating, 100 g damage
P.B.T. polyester
Tinned copper alloy, P. C.
270°C (518°F)
5 seconds
80°C (176°F)
30 seconds
6 grams
Material
Resistance
Silver tin oxide
< 50 milliohms initially
COIL
Power
At Pickup Voltage
(typical)
Max. Continuous
Dissipation
Temperature Rise
Temperature
253 mW
Shock
Enclosure
Terminals
Max. Solder Temp.
1.3 W at 20°C (68°F) ambient
39°C (70°F) at nominal coil voltage
Max. 130°C (266°F)
Max. Solder Time
Max. Solvent Temp.
Max. Immersion Time
Weight
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
03/23/04W
AZETTLER [ AMERICAN ZETTLER, INC. ]
