AZ769
25 AMP MINIATURE
POWER RELAY
FEATURES
•
•
•
•
•
•
•
Low cost
25 Amp switching
80 Amp inrush current
Quick connect and PCB terminals
Flux tight construction
UL, CUR file E44211
VDE Pending
CONTACTS
Arrangement
Ratings
SPST (1 Form A)
Resistive load:
Max. switched power: 600 W or 6925 VA
Max. switched current: 25 A
Max. switched voltage: 150* VDC or 400 VAC
*
Note: If switching voltage is greater than 30 VDC, special
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Operate Time (typical)
Release Time (typical)
Minimum operations
2 x 10
6
1 x 10
5
at 25 A 277 VAC Res.
20 ms at nominal coil voltage
10 ms at nominal coil voltage
(with no coil suppression)
precautions must be taken. Please contact the factory.
Rated Load
UL, CUR
25A at 277 VAC resistive (100k cycles) [1] [2]
1 HP at 120 VAC (100k cycles) [1] [2]
2 HP at 240 VAC (100k cycles) [2]
2 HP at 240 VAC (30k cycles) [1]
25 A 250 VAC resistive [1] [2]
silver cadmium oxide [1], silver tin oxide [2]
< 50 milliohms initially
(24 V, 1 A voltage drop method)
Dielectric Strength
4500 Vrms coil to contact
(at sea level for 1 min.)
1500 Vrms between open contacts
10,000 V surge contact to coil
Insulation
Resistance
Dropout
Ambient Temperature
Operating
Storage
Vibration
1000 megohms min. at 20°C, 500 VDC,
50% RH
Greater than 10% of nominal coil voltage
At nominal coil voltage
-40°C (-40°F) to 80°C (176°F)
-40°C (-40°F) to 130°C (266°F)
0.062" DA at 10–55 Hz
TÜV
Material
Resistance
COIL
Shock
Power
At Pickup Voltage
(typical)
Max. Continuous
Dissipation
Temperature Rise
Temperature
441 mW
Operating
20 g, 11 ms,
1
/
2
sine (no false operation)
Non-Operating
100 g, 11 ms,
1
/
2
sine (no damage)
Enclosure
2.25 W at 20°C (68°F) ambient
45°C (81°F) at nominal coil voltage
Max. 130°C (266°F)
Max. Solder Temp.
Terminals
P.B.T. polyester
Tinned copper alloy
P. C. & quick connect
Note: Allow suitable slack on leads when wiring,
and do not subject the terminals to excessive
force.
270°C (518°F)
5 seconds
23 grams
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
Max. Solder Time
Weight
4/24/09W
AZETTLER [ AMERICAN ZETTLER, INC. ]
