AZ832P
AZ
POLARIZED DIP RELAY
BISTABLE (LATCHING)
FEATURES
•
•
•
•
•
•
•
•
•
•
High sensitivity, 42 mW pickup
Low profile DIP package
Meets FCC Part 68.302 1500 V lightning surge
Meets FCC Part 68.304 1000 V dielectric
Single and dual coil versions
DC coils to 24 VDC
High switching capacity, 60 W, 250 VA
Fits standard 16 pin IC socket
Epoxy sealed for automatic wave soldering and cleaning
UL, CUR file E43203
GENERAL DATA
DPDT (2 Form C)
Bifurcated crossbar contacts
Resistive load:
Max. switched power: 60 W or 250 VA
Max. switched current: 2 A
Max. switched voltage: 250 VDC or 250 VAC
Rated Load
UL
Material
Resistance
2 A at 30 VDC resistive
2 A at 125 VAC resistive
Gold plated silver against gold plated silver
< 50 milliohms initially
Insulation Resistance
Life Expectancy
Mechanical
Electrical
Set Time (typical)
Reset Time (typical)
Bounce (typical)
Dielectric Strength
(at sea level)
Minimum operations
2 x 10
7
1 x 10
5
at 2 A, 30 VDC or 1 A, 125 VAC
2 x 10
6
at 1 A, 30 VDC or .5 A, 125 VAC
3 ms at nominal coil voltage
3 ms at nominal coil voltage
3 ms
1500 Vrms contact to coil
1000 Vrms between contact sets
1000 Vrms across contacts
Meets FCC Part 68.302 lightning surge
Meets FCC Part 68.304 V dielectric
1000 megohms min. at 20°C, 500 VDC,
50% RH
At nominal coil voltage
-40°C (-40°F) to 85°C (185°F)
-40°C (-40°F) to 115°C (239°F)
50 g at 10–500 Hz
50 g
P.B.T. polyester
Tinned copper alloy, P.C.
270°C (518°F)
5 seconds
80°C (176°F)
30 seconds
5 grams
CONTACTS
Arrangement
Ratings
COIL
Power
At Pickup Voltage
(typical)
Max. Continuous
Dissipation
Temperature
Standard coil: 56 mW
Sensitive coil: 42 mW
0.9 W at 20°C (68°F)
Max. 115°C (239°F)
Ambient Temperature
Operating
Storage
Vibration
Shock
Enclosure
Terminals
Max. Solder Temp.
NOTES
1.
2.
3.
4.
All values at 20°C (68°F).
Relay may pull in with less than “Must Operate” value.
Relay has fixed coil polarity.
For complete isolation between the relay’s magnetic fields, it is
recommended that a .197" (5.0 mm) space be provided between
adjacent relays.
5. Relay adjustment may be affected if undue pressure is exerted
on relay case.
6. Specifications subject to change without notice.
Max. Solder Time
Max. Solvent Temp.
Max. Immersion Time
Weight
8/3/07 W
AZETTLER [ AMERICAN ZETTLER, INC. ]
