AZ850
MICROMINIATURE
POLARIZED RELAY
FEATURES
•
Microminiature size: Height: .197 inches (5 mm);
Length: .551 inches (14 mm); Width: .354 inches (9 mm)
•
High sensitivity, 79 mW pickup
•
Monostable and bistable (latching) single coil and two
coil versions available
•
Meets FCC Part 68.302 1500 V lightning surge
•
DIP terminal layout, fits 10 pin IC socket
•
Epoxy sealed for automatic wave soldering and cleaning
•
UL, CUR file E43203
CONTACTS
Arrangement
Ratings
DPDT (2 Form C)
Bifurcated crossbar contacts
Resistive load:
Max.
Max.
Max.
Max.
Rated Load
UL
Material
Resistance
switched power: 30 W or 62.5 VA
switched current: 1 A
switched voltage: 220 VDC or 250 VAC
carry current:
2A
Set Time
(bistable versions)
Reset Time
(bistable versions)
Dropout
Capacitance
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Operate Time (typical)
Release Time (typical)
Minimum operations
1 x 10
8
2 x 10
5
at 1 A, 30 VDC, resistive
1 x 10
5
at 0.5 A, 125VAC, resistive
2 ms at nominal coil voltage
1 ms at nominal coil voltage
(with no coil suppression)
2 ms at nominal coil voltage (typical)
2 ms at nominal coil voltage (typical)
Greater than 10% of nominal coil voltage
Contact to contact: 0.4 pF
Contact set to contact set: 0.2 pF
Contact to coil: 0.9 pF
1000 Vrms between contact sets
1000 Vrms across contacts
1000 Vrms contact to coil
Meets FCC part 68.302 1500 V lightning
surge
1000 megohms min. at 25°C, 500 VDC,
50% RH
At nominal coil voltage
-40°C (-40°F) to 70°C (158°F)
-40°C (-40°F) to 105°C (221°F)
.130" DA at 10–55 Hz
50 g
LCP
Tinned copper alloy, P.C.
250°C (482°F)
5 seconds
80°C (176°F)
30 seconds
1.5 grams
1 A at 30 VDC resistive
0.5 A at 125 VAC resistive
Silver palladium; gold clad
< 50 milliohms initially
COIL (Polarized)
Power
At Pickup Voltage
(typical)
Max. Continuous
Dissipation
Temperature Rise
Temperature
Single side stable:
79–169 mW
Bistable (latching) single coil: 56–84 mW
Bistable (latching) two coil: 113–169 mW
875 mW at 20°C (68°F) ambient
18°C (32°F) at nominal coil voltage
Max. 105°C (221°F)
Dielectric Strength
(at sea level)
Insulation Resistance
Ambient Temperature
Operating
Storage
Vibration
Shock
Enclosure
NOTES
All values at 20°C (68°F).
Relay has fixed coil polarity.
Relay may pull in with less than “Must Operate” value.
Relay adjustment may be affected if undue pressure is exerted
on relay case.
5. For complete isolation between the relay’s magnetic fields, it is
recommended that a .197" (5.0 mm) space be provided between
adjacent relays.
6. Specifications subject to change without notice.
1.
2.
3.
4.
Terminals
Max. Solder Temp.
Max. Solder Time
Max. Solvent Temp.
Max. Immersion Time
Weight
6/20/05 W