AZ946
MINIATURE
PC BOARD RELAY
FEATURES
•
•
•
•
•
•
•
Subminiature size
Coils to 48 VDC
Epoxy sealed for automatic wave soldering
Contacts rated at 6 Amps
Life expectancy to 20 million operations
Extremely low cost
UL, CUR file E43203
CONTACTS
Arrangement
Max. Ratings
2 Form C (DPDT)
Noninductive load:
Max. switched power:
180 W or 1385 VA
Max. switched current: 6 A
Max. switched voltage: 150* VDC or 300 VAC
UL Rating:
5 A at 30 VDC resistive, 100k cycles
5 A at 277 VAC general use
(100k cycles)
6 A at 30 VDC resistive
6 A at 125 VAC resistive
* If switching voltage is greater than 30 VDC
special precautions must be taken. Please
contact the factory
Material
Resistance
Silver Cadmium Oxide, gold plated
100 milliohms max.
(6 V 1 A method)
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Operate Time (typical)
Release Time (typical)
Dielectric Strength
(at sea level for 1 min.)
Minimum operations
2 x 10
7
1 x 10
5
5 A 277 VAC Res.
5 ms at nominal coil voltage
5 ms at nominal coil voltage
(with no coil suppression)
1000 Vrms coil to contact
750 Vrms between open contacts
1000 Vrms contact set to contact set
100 megohms min. at 20°C, 500 VDC,
50% RH
Greater than 10% of nominal coil voltage
At nominal coil voltage
-10°C (14°F) to 60°C (140°F)
-10°C (14°F) to 105°C (221°F)
0.062" DA at 5–55 Hz
10 g
P.B.T. polyester
Tinned copper alloy, P. C.
270°C (518°F)
5 seconds
80°C (176°F)
30 seconds
12 grams
Insulation
Resistance
Dropout
Ambient Temperature
Operating
Storage
Vibration
Shock
COIL
Power
At Pickup Voltage
(typical)
Max. Continuous
Dissipation
Temperature Rise
Max. Temperature
384 mW
1.2 W at 20°C (68°F)
Enclosure
Terminals
Max. Solder Temp.
Max. Solder Time
Max.Solvent Temp.
35°C (63°F)
105°C (221°F)
Max. Immersion Time
Weight
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
4. Unsealed relays should not be dipped cleaned
5/20/04W