ARIZONA MICROTEK, INC.
AZ10E116
AZ100E116
ECL/PECL Quint Differential Line Receiver
FEATURES
•
•
•
•
•
500ps Maximum Propagation Delay
Dedicated V
CCO
Pin for Each Receiver
Operating Range of 4.2V to 5.46V
75kΩ Internal Input Pulldown Resistors
Direct Replacement for ON Semiconductor
MC10E116 & MC100E116
PACKAGE
PLCC 28
PLCC 28
1
2
PACKAGE AVAILABILITY
PART NUMBER
AZ10E116FN
AZ100E116FN
MARKING
AZM10E116
<Date Code>
AZM100E116
<Date Code>
NOTES
1,2
1,2
Add R2 at end of part number for 13 inch (2.5K parts) Tape & Reel.
Date code format: “YY” for year followed by “WW” for week.
DESCRIPTION
The AZ10/100E116 is a quint differential line receiver with emitter-follower outputs. The E116 provides a V
BB
output for single-ended use or a DC bias reference for AC coupling to the device. For single-ended input
applications, the V
BB
reference should be connected to one side of the Dn/Dn differential input pair. The input
¯
signal is then fed to the other Dn/Dn input. The V
BB
pin should be used only as a bias for the E116 as its sink/source
¯
capability is limited. When used, the V
BB
pin should be bypassed to ground via a 0.01μF capacitor.
The receiver design features clamp circuitry to cause a defined state if both the inverting and non-inverting
inputs are left open; in this case the Q output goes LOW, while the Q output goes HIGH. This feature makes the
¯
device ideal for twisted pair applications.
If both inverting and non-inverting inputs are at an equal potential of > V
CC
-2.5V, the receiver does not go
to a defined state. This condition may produce output voltage levels between HIGH and LOW.
NOTE: Specifications in ECL/PECL tables are valid when thermal equilibrium is established.
1630 S. STAPLEY DR., SUITE 127
•
MESA, ARIZONA 85204
•
USA
•
(480) 962-5881
•
FAX (480) 890-2541
www.azmicrotek.com
AZM [ ARIZONA MICROTEK, INC ]
