NON-ISOLATED DC/DC CONVERTERS
2.4 Vdc - 5.5 Vdc Input, 0.6 Vdc - 3.63 Vdc /12 A Output
December 2, 2010
Bel Power Inc., a subsidiary of Bel Fuse Inc.
RoHS Compliant
•
•
•
•
SLIN-12F2Ax
Features
•
•
•
•
•
•
•
•
•
•
Rev.B
Wide Input Voltage Range
Output Voltage Programmable
Fixed Switching Frequency
Remote On/Off
Remote Sense
Over Temperature Protection
Output Over Current Protection
Ability to Sink and Source Current
Cost Efficient Open Frame Design
Tunable Loop
TM
(a registered trademark of Lineage Power Systems) to Optimize Dynamic
output voltage response
Class 1, Category 2, Non-Isolated DC/DC Converter (refer to IPC-9592)
Compliant to RoHS EU Directive 2002/95/EC
UL*
60950-1 Recognized,
CSA
†
C22.2 No. 60950-1-03 Certified
VDE
‡
0805:2001-12 (EN60950-1) Licensed
Applications
•
•
•
Distributed power architectures
Intermediate bus voltage applications
Telecommunications equipment
•
•
•
Servers and storage applications
Networking equipment
Industrial equipment
Description
The SLIN-12F2Ax series of power modules are non-isolated dc/dc converters that can deliver up to 12A of output
current. These modules operate over a wide range of input voltage (V
IN
= 2.4Vdc-5.5Vdc) and provide a
precisely regulated output voltage from 0.6Vdc to 3.63Vdc, programmable via an external resistor. Features
include remote On/Off, adjustable output voltage, over current protection, and over temperature protection. A
new feature, the Tunable Loop
TM
, allows the user to optimize the dynamic response of the converter to match the
load with reduced amount of output capacitance leading to savings on cost and PWB area.
Part Selection
Output Voltage
0.6 Vdc - 3.63 Vdc
Input Voltage
2.4 Vdc - 5.5 Vdc
Max. Output
Current
12 A
Typical
Efficiency
92.7%
Model Number
Active High
SLIN-12F2A0
Model Number
Active Low
SLIN-12F2AL
Notes:
Add “G” suffix at the end of the model number to indicate Tray Packaging.
Part Number Explanation
S LIN – 12 F 2A 0
1
2
3 4
5
6
4--- Wide input voltage range (2.4-5.5V)
5--- Wide output voltage range (0.6-3.63V)
6--- Enable, active high, change “0” to “L” means active low
1---Surface mount
2---Series code
3---Output current (12A)
Bel Fuse Inc.
206 Van Vorst Street, Jersey City, NJ 07302
•
Tel 201-432-0463
•
Fax 201-432-9542
•
www.belfuse.com
1