NON-ISOLATED DC/DC CONVERTERS
4.5 Vdc - 14 Vdc Input, 0.69 Vdc - 5.5 Vdc /12 A Outputs
December 2, 2010
Bel Power, Inc. , a subsidiary of Bel Fuse, Inc.
RoHS Compliant
•
•
•
•
SLIN-12E1Ax
Features
•
•
•
•
•
•
•
•
•
•
•
•
•
Rev.H
Wide Input Voltage Range
Fixed Switching Frequency
Power Good Signal
Remote Sense
Remote On/Off
Ability to Sink and Source Current
Cost Efficient Open Frame Design
Over Temperature Protection
Output Over Current Protection
Tunable Loop
TM
(a registered trademark of Lineage Power Systems) to
Optimize Dynamic output voltage response
Flexible output voltage sequencing
Fixed switching frequency and ability to synchronize with external clock
Class 1, Category 2, Non-Isolated DC/DC Converter (refer to IPC-9592)
Compliant to RoHS EU Directive 2002/95/EC
Compatible in a Pb-free or SnPb reflow environment
UL*
60950-1Recognized,
CSA
†
C22.2 No. 60950-1-03 Certified
VDE
‡
0805:2001-12 (EN60950-1) Licensed
Applications
•
•
•
Distributed power architectures
Intermediate bus voltage applications
Telecommunications equipment
•
•
•
Servers and storage applications
Networking equipment
Industrial equipment
Description
The SLIN-12E1Ax power modules are non-isolated dc-dc converters that can deliver up to 12A of output current.
These modules operate over a wide range of input voltage (V
IN
= 4.5Vdc-14Vdc) and provide a precisely
regulated output voltage from 0.69Vdc to 5.5Vdc, programmable via an external resistor. Two new features
added with this family of products are the ability to externally tune the voltage control loop and frequency
synchronization. Other features include remote On/Off, adjustable output voltage, over current and over
temperature protection, power good and output voltage sequencing. The Tunable Loop
TM
, allows the user to
optimize the dynamic response of the converter to match the load with reduced amount of output capacitance
leading to savings on cost and PWB area.
Part Selection
Output Voltage
0.69 Vdc - 5.5 Vdc
Input Voltage
4.5 Vdc - 14 Vdc
Max. Output
Current
12 A
Typical
Efficiency
94.3%
Model Number
Active High
SLIN-12E1A0
Model Number
Active Low
SLIN-12E1AL
Notes:
Add “G” suffix at the end of the model number to indicate Tray Packaging.
Part Number Explanation
S LIN – 12 E 1A 0
1
2
3 4
5
6
1---Surface mount
2---Series code
3---Output current (12A)
4---Wide input voltage range (4.5-14V)
5---Wide output voltage range (0.69-5.5V)
6---Enable, active high, change “0” to “L” means active low
Bel Fuse Inc.
206 Van Vorst Street, Jersey City, NJ 07302
•
Tel 201-432-0463
•
Fax 201-432-9542
•
www.belfuse.com
1