Safety Instructi
i
ons
Safety Instruct ons
Before getting started, read the following important cautions.
1.
The RC-520/ BBS-2520 does not come equipped with an operating
system. An operating system must be loaded first before installing
any software into the computer.
2.
Be sure to ground yourself to prevent static charge when installing
the internal components. Use a grounding wrist strap and place all
electronic components in any static-shielded devices. Most
electronic components are sensitive to static electrical charge.
3.
Disconnect the power cord from the RC-520/BBS-2520 before
making any installation. Be sure both the system and the external
devices are turned OFF. Sudden surge of power could ruin
sensitive components. Make sure the RC-520/BBS-2520 is
properly grounded.
4.
Do not open the system’s back cover. If opening the cover for
maintenance is a must, only a trained technician is allowed to do
so. Integrated circuits on computer boards are sensitive to static
electricity. To avoid damaging chips from electrostatic discharge,
observe the following precautions:
Before handling a board or integrated circuit, touch an unpainted
portion of the system unit chassis for a few seconds. This will help
to discharge any static electricity on your body.
When handling boards and components, wear a wrist-grounding
strap, available from most electronic component stores.
BOSER [ BOSER TECHNOLOGY CO., LTD ]
