Chapter 2
Unpacking
2.1
Opening the Delivery Package
The HS-6238 is packed in an anti-static bag. The board has
components that are easily damaged by static electricity. Do not
remove the anti-static wrapping until proper precautions have been
taken. Safety Instructions in front of this manual describe anti-static
precautions and procedures.
2.2
Inspection
After unpacking the board, place it on a raised surface and carefully
inspect the board for any damage that might have occurred during
shipment. Ground the board and exercise extreme care to prevent
damage to the board from static electricity.
Integrated circuits will sometimes come out of their sockets during
shipment. Examine all integrated circuits, particularly the BIOS,
processor, memory modules, ROM-Disk, and keyboard controller chip
to ensure that they are firmly seated. The HS-6238 delivery package
contains the following items:
HS-6238 Industrial Single Board Computer
Ultra 100 IDE port Flat Cable x 1
FDD port Flat Cable x 1
Printer Port Flat Cable x 1
PS/2 to Standard type Keyboard Transfer Cable x 1
8-pin USB Cable x 1
Speaker Connector with bracket x 1
Dual-ported RS-232 connector with bracket x 2
ATX 5-pin power connector x 1
Jumper Bag
Utility CD-ROM x 1
User’s Manual
5
BOSER [ BOSER TECHNOLOGY CO., LTD ]
