BOE100LH
TO18 Plastic
IR Emitter
Leaded Housing
ABSOLUTE MAXIMUM RATINGS (25
o
C unless
STORAGE TEMP
-40 C TO +100
o
C
OPERATING TEMP
-40 C TO 100
o
C
CONTINUOUS FORWARD CURRENT
100mA
5.0V
200mW (1)
240
o
C for 5secs(2,3,5)
260
o
C for 10secs
REVERSE VOLTAGE
POWER DISSIPATION
LEAD SOLDERING TEMPERATURE (Iron)
LEAD SOLDERING TEMPERATURE9(Flow)
OPTO ELECTRONIC DATA(Ta=25
o
C unless stated)
PARAMETER
Forward Voltage
SYMBOL
Vf
MIN
TYP
MAX
1.70
UNITS
V
TEST CONDISTIONS
If = 20mA
Reverse leakage Current
Ir
10
μA
Vr=5.0V
Peak Emission Wavelength
λp
880
nm
If=20mA
Emission Angle at �½ Radiated Power
Density.
Radiant incidence
Θ
E
Θ
16
±35
deg
26
mW/sqcm
If=100mA(6,7)
NOTES
1. Derate power dissipation linearly at 2.7mW/ C above 25 C.
2. RMA flux is recommended.
3. Methonal or Isopropylalcohols are recommended as cleaning agents.
4. Solder iron tip 1.6mm minimum from housing.
5. Leads not to be under stress or tension.
6. Measurment taken at the end of a 100
μ
S pulse.
7.
E
Θ
is a measure of the average apertured radiant energy incident
upon a sensing area 6.35mm diameter perpendicular to and centred on
the mechanical axis of the lens and 10.7mm from the measurement sur-
face.
E
θ
is not necessarily uniform within the measurement area.
o
o
BEDFORD OPTO TECHNOLOGY LTD
1,BIGGAR BUSINESS PARK, BIGGAR,LANARKSHIRE, ML12 6FX
Tel: +44 (0) 1899 221221 Fax: +44 (0) 1899 221009
Website: bot.co.uk E-mail: bill@bot.co.uk
PAGE 2
BOT [ BEDFORD OPTO TECHNOLOGY LTD. ]
