4CE Series
Specifications
Input Specifications:
5-6W DC-DC Converters
BTCPower
TM
Input Voltage Range…………….……12V……...………………..9-18V
24V……………………..18-36V
48V……………………..36-72V
Input Filter………………………………………………………..Pi Type
Output Specifications:
Voltage Accuracy…………….. ……………..………… .+/- 2.0 % max.
Voltage Balance ( Dual )………………………………...+/- 1.0 % max.
Ripple & Noise, 20 MHz BW…………5V………..… 100 mV p-p max.
12V / 15V…………1% p-p max.
Temperature Coeffcient………………………… +/- 0.05 % / ºC max.
Short Circuit Protection………………..……………………Continuous
Line Regulation ¹ Single / Dual Output………….……..+/- 0.5 % max.
Load Regulation Single²……………… …………….….+/- 0.5 % max.
Dual Output³………………….…………...….+/- 1.0 % max.
General Specifications
:
Efficiency………………………………………………..……...see table
Isolation Resistance…………………………………………..100Mohm
Switching Frequency……………………………………..100 KHz, min.
Operating Temperature Range…………………………-25ºC ~ +71ºC
Case Temperature (plastic case)……………………….. ..95 ºC max.
(copper case)…………………………100ºC max.
Cooling……………………………………………….Free air convection
Storage Temperature Range……………………..…..-40 ºC ~ +100ºC
Isolation Voltage………………………….………………..500VDC min.
Dimensions…………..…………2” x 2” x 0.4 “(50.8 x 50.8 x 10.2 mm)
Case Materi………..Black Coated Copper with Non-conducted base
Note:
1.
2.
3.
Mesured from high line to low line
Measured form full load to 10% load
Measured from full load to ¼ load
Outline Information and Pin-out
•
•
NP---No Pin
All dimensions are in inches [mm]
The information and specifications contained in this brief are believed to be accurate and reliable at the time of publication. Specifications are
subject to change without notice. Refer to product specification sheet for performance characteristics and application guidelines.
Broadband TelCom Power, Inc. –
1719 S. Grand Avenue, Santa Ana, CA 92705 U.S.A.
Tel.: 714-259-4888 • Fax: 714-259-0840• www.btcpower.com • Email: sales@btcpower.com
DS LP 4CE Rev2 16-1-
0403
BTCPOWER [ BROADBAND TELCOM POWER, INC. ]
