CM1442
LCD and Camera EMI Filter Array with ESD Protection
Features
•
•
•
•
•
•
•
•
Six and eight channels of EMI filtering with inte-
grated ESD protection
0.4mm pitch, 15-bump, 2.360mm x 1.053mm foot-
print Chip Scale Package (CM1442-06)
0.4mm pitch, 20-bump, 3.160mm x 1.053mm foot-
print Chip Scale Package (CM1442-08)
Pi-style EMI filters in a capacitor-resistor-capacitor
(C-R-C) network
±15kV
ESD protection on each channel
(IEC 61000-4-2 Level 4, contact discharge)
±30kV
ESD protection on each channel (HBM)
Greater than 30dB attenuation (typical) at 1 GHz
Chip Scale Package features extremely low
lead inductance for optimum filter and ESD
performance
OptiGuard
™
coated for improved reliability at
assembly
Lead-free version available
Product Description
The CM1442 is a family of pi-style EMI filter arrays with
ESD protection, which integrates six and eight filters
(C-R-C) in Chip Scale Package form factor with
0.40mm pitch. The CM1442 has component values of
15pF-100Ω-15pF per channel. The CM1442 has a cut-
off frequency of 120MHz and can be used in applica-
tions where the data rates are as high as 48Mbps. The
parts include avalanche-type ESD diodes on every pin,
which provide a very high level of protection for sensi-
tive electronic components that may be subjected to
electrostatic discharge (ESD). The ESD protection
diodes safely dissipate ESD strikes of
±15kV,
well
beyond the maximum requirement of the IEC61000-4-
2 international standard. Using the MIL-STD-883
(Method 3015) specification for Human Body Model
(HBM) ESD, the pins are protected for contact dis-
charges at greater than
±30kV.
This device is particularly well suited for portable elec-
tronics (e.g. wireless handsets, PDAs, notebook com-
puters) because of its small package format and easy-
to-use pin assignments. In particular, the CM1442 is
ideal for EMI filtering and protecting data and control
lines for the I/O data ports, LCD display and camera
interface in mobile handsets.
The CM1442 incorporates
OptiGuard
™
which results
in improved reliability at assembly. The CM1442 is
available in a space-saving, low-profile Chip Scale
Package with optional lead-free finishing. It is manu-
factured with a 0.40mm pitch and 0.25mm CSP solder
ball to provide up to 28% board space saving versus
competing CSP devices with 0.50mm pitch and
0.30mm CSP solder ball.
•
•
Applications
•
•
•
•
•
•
LCD and Camera data lines in mobile handsets
I/O port protection for mobile handsets, notebook
computers, PDAs etc.
EMI filtering for data ports in cell phones, PDAs or
notebook computers.
Wireless handsets
Handheld PCs/PDAs
LCD and camera modules
Electrical Schematic
100Ω
FILTER+ESDn*
(Pins A1-An)
FILTER+ESDn*
(Pins C1-Cn)
15pF
15pF
GND
(Pins B1-Bm
where m = n/2)
* See Package/Pinout Diagram
for expanded pin information.
© 2005 California Micro Devices Corp. All rights reserved.
11/08/05
1 of 6 or 8 EMI/RFI + ESD Channels
490 N. McCarthy Blvd., Milpitas, CA 95035-5112
●
Tel: 408.263.3214
●
Fax: 408.263.7846
●
www.cmd.com
1
CALMIRCO [ CALIFORNIA MICRO DEVICES CORP ]
