2600 SERIES
Bobbin Wound Surface Mount Inductors
1 - MECHANICAL DIMENSIONS
9.00±0.40
(UNSHIELDED TYPES)
2 - MECHANICAL DIMENSIONS
11.60
(EMI SHIELDED TYPES)
5.40±0.40
5.40±0.50
1.00
10.00±0.40
12.60
Recommended Footprint Details
R1.00
2.50±0.05
Recommended Footprint Details
R1.00
2.50±0.05
10.00±0.05
10.00±0.05
9.50±0.05
Unless otherwise stated all dimensions in mm ±0.35mm.
Hatching represents solder pads.
9.50±0.05
Unless otherwise stated all dimensions in mm ±0.35mm.
Hatching represents solder pads.
PACKAGE DETAILS
Order Code
TYP Weight (g)
Packaging Style
26XXX
26SXXX
1.54
2.34
Tape & Reel
1
1 For tape and reel packaging details refer to datasheet NDCAN002
C&D Technologies (NCL) Limited reserve the right to alter or improve the
specification, internal design or manufacturing process at any time, without
notice. Please check with your supplier or visit our web site to ensure that
you have the current and complete specification for your product before use.
© C&D Technologies (NCL) Limited 2001
NMP 2600.3
No part of this publication may be copied, transmitted or stored in a
retrieval system or reproduced in any way including, but not limited to,
photography, photocopy, magnetic or other recording means, without prior
written permission from C&D Technologies (NCL) Limited.
Instructions for use are available from www.dc-dc.com
C&D Technologies (NCL) Ltd
Tanners Drive, Blakelands North
Milton Keynes MK14 5BU, England
Tel: +44 (0)1908 615232
Fax:+44 (0)1908 617545
email: info@cdtechno-ncl.com
www: http://www.dc-dc.com
C&D Technologies (NCL), Inc.
5816 Creedmoor Road, Raleigh
NC 27612, USA
Tel: +1 (919) 571-9405
Fax: +1 (919) 571-9262
email: info@us.cdtechno-ncl.com
CANDD [ C&D TECHNOLOGIES ]
