ABSOLUTE MAXIMUM RATINGS
Output Short-Circuit Duration ................................................... Momentary
Internal Power Dissipation .............................................................. 750mW
Lead Soldering Temperature (10 seconds max) ............................ +300°C
APPLICATION NOTE
UNBALANCED LOADS
Unbalanced loads may be used on dual output models with
either side providing up to its rated current. Output volt-
ages, by design, will track each other in an unbalanced state
within ±10% of one another.
OUTPUT NOISE
Output noise can be reduced to 30mVp-p, typically, by
adding a 10µF tantalum capacitor with an equivalent series
resistance (ESR) of less than 150mΩ at 10kHz across each
output.
ORDERING INFORMATION
PWR 11XX
Device Family
PWR Indicates DC/DC Converter
Model Number
Selected from Table of Electrical Characteristics
PWR11XX 7/99 REV E
Page 3