DATA SHEET
MeshConnect™
Module Series
Module and Extended Range Module
Development Kits available: ZICM2410P0-KIT2-1, ZICM2410P2-KIT1-1
DESCRIPTION
CEL's MeshConnect™ Module Series provides high performance
and low cost 2.4 GHz IEEE 802.15.4 / ZigBee modules for a broad
range of wireless networks. The MeshConnect certified and quali-
fied modules, enable customer to accelerate time to market by
greatly reducing design and certification phases of development.
CEL's MeshConnect™ radio modules leverage the advanced
features of the MeshConnect™ Integrated Circuit (IC). The IC is
a true single-chip solution, compliant with ZigBee specifications
and IEEE 802.15.4, a complete wireless solution for all ZigBee
applications. The IC consists of an RF transceiver with baseband
modem, a hardwired MAC and an embedded 8051 microcon-
troller with internal Flash memory. The device provides numerous
general-purpose I/O pins, peripheral functions such as timers and
UARTs and is one of the first devices to provide an embedded
Voice CODEC. This device is also ideal for low power applications.
The original MeshConnect module delivers excellent performance
at a surprisingly low cost. The module’s +6dBm output power
means better range, more reliable transmission and fewer nodes
in your network. It also makes these modules ideal for applica-
tions where cost and power constraints do not allow for external
power amplifiers or peripheral range extension components.
The MeshConnect Extended Range module adds a power ampli-
fier (PA) and low noise amplifier (LNA) to increase range to over
two miles - plus more reliable transmission and fewer nodes in
your network. It is especially useful for open outdoor applica-
tions where the nodes are physically far apart, or for indoor use
where the nodes have to operate in a noisy RF environment. The
Extended Range Module’s outstanding +123 dBm budget link
ensures high quality connections even in such harsh environments.
Integrated Transceiver Modules for ZigBee / IEEE 802.15.4
MeshConnect
™
Module Series
•
•
•
•
•
•
•
•
96 kB FLASH Memory
8 kB SRAM
8051 MCU core
up to 22 GPIO Pins
SPI (Master/Slave) + UARTs
I
2
S/PCM Interface with two 128-byte FIFOs
µ-law/a-law/ADPCM Voice Codec
4-channel 8-bit ADC
FEATURES
• High RF performance:
- Up to 123.5 dB RF Link Budget
- RX Sensitivity: -97 dBm and -103.5 dBm
- RF TX Power:+6 dBm and +20 dBm
• Scalable Data Rate: 250 kbps, 500 kbps and 1Mbps
• Miniature footprint: 1” x 1.350” (25.4 mm x 34.3 mm)
• Voice Codec Support: µ-law/a-law/ADPCM
• 4 Level Power Management Scheme w/ Deep Sleep Mode (0.3 µA)
• Integrated PCB trace antenna
• 16 RF channels
• Up to 12,000 feet of range
• AES 128-bit encryption
• FCC, CE and IC certifications
• ROHS compliant
APPLICATIONS
• Food processing controls
• Traffic Management
• Sensor Networks
• Asset Management
• Barcode reader
• Patient Monitoring
• Glucose monitor
Industrial Controls
• Security
• HVAC control
• Lighting control
• Thermostats
Home &
Building Automation
ORDERING INFORMATION
Part Number
Order Number
ZICM2410P0-1
MeshConnect™
Module
ZICM2410P0-1-SN
ZICM2410P0-1C
ZICM2410P0-1C-SN
ZICM2410P0-KIT2-1
ZICM2410P2-1
MeshConnect™
Extended Range Module
ZICM2410P2-1-SN
ZICM2410P2-1C
ZICM2410P2-1C-SN
ZICM2410P2-KIT1-1
Document No: 0007-00-07-00-000 (Issue C)
Date Published: April 7, 2010
Description
+6 dBm Output power, PCB Trace antenna
+6 dBm Output power, PCB Trace antenna, SNAP software
+6 dBm Output power, with u.FL Connector for external antenna
+6 dBm Output power, with u.FL Connector for external antenna, SNAP software
+6 dBm Engineering Development Kit
+20 dBm Output power, PCB Trace antenna
+20 dBm Output power, PCB Trace antenna, SNAP software
+20 dBm Output power, with u.FL Connector for external antenna
+20 dBm Output power, with u.FL Connector for external antenna, SNAP software
Evaluation board for +20 dBm module
Page 1
The information in this document is subject to change without notice, please confirm data is current
CEL [ CALIFORNIA EASTERN LABS ]
