celpac
AC Semiconductor Contactor
pitch 22,5mm with Diagnostic
compact size and DIN rail
mounting.
❏
Ready to use Single-Phase Relay: " Install it & Forget it!"
Zero cross model :
150-510VAC
50A
back to back thyristors on output
TMS
2
technology - I
2
t value > 1500A
2
s
I
2
t values on request to 5 000A
2
s.
❏
Model with
diagnostic
: status of the SSR and the load .
Normally closed status output .
Without external power supply .
Status visualization by yellow LED (*) .
Status output can be chained.
❏
Very high immunity : Voltage protection on output
and input- 4kV according IEC61000-4-4 & 5
❏
Large control range :
3,5-32VDC
with an input
current < 10 mA on all the range.
Green LED visualization on the input.
❏
IP20 housing
❏
Low zero cross voltage ( <15V)
❏
Mounting and dismounting on DIN rail without any
tool or directly mountable on panel.
❏
Designed in conformity with EN60947-4-3
(IEC947-4-3) and EN60950
-UL-cUL
Dimensions :
(*) : was Red on the first pieces.
S/CLP/SILD865170/F/25/03/2005
page 1 /5 GB
SILD865170
Output : 150-510VAC 32A(*)
Input : 3,5-32VDC - I<10mA
Diagnostic : 30VDC - 100mA
PATENTED !
28A
(*) see conditions (thermal curve page 4)
Mains
400VAC 50hz
-
+
Output
status
diag
SSR
Typical
application:
9kW resistor
(AC-51 load)
on 400 VAC
CHARGE/LOAD
+
-
Input
Control
Proud to serve you
All technical caracteristics are subject to change without previous notice.
Caractéristiques sujettes à modifications sans préavis.
r
celduc
e
l
a
i
s
CELDUC [ celduc-relais ]
