CM2836/B/C
300mA L
OW
E
SR
CMOS LDO W
ITH
E
NABLE
DETAILED DESCRIPTION
The CM2836/B/C family of CMOS regulators contains a PMOS pass transistor, voltage reference, error amplifier, over-current
protection, output short protection, and thermal shutdown.
The P-channel pass transistor receives data from the error amplifier, over-current protection, output short protection, and thermal
protection circuits. During normal operation, the error amplifier compares the output voltage to a precision reference. Over-current
and Thermal shutdown circuits become active when the junction temperature exceeds 150℃, or the current exceeds 300mA.
During thermal shutdown, the output voltage remains low. Normal operation is restored when the junction temperature drops
below 120℃.
The CM2836/B/C switches from voltage mode to current mode when the load exceeds the rated output current. This prevents
over-stress.
ENABLE
The Enable pin normally floats high. When actively, pulled low, the PMOS pass transistor shut off, and all internal circuits are
powered down. In this state, the quiescent current is less than 2μA. This pin behaves much like an electronic switch.
EXTERNAL CAPACITOR
The CM2836/B/C is stable with a Low ESR output capacitor to ground of 1.0μF or greater. It can keep stable even with higher
ESR capacitors. A second capacitor is recommended between the input and ground to stabilize VIN. The input capacitor should
be larger than 1μF to have a beneficial effect. All capacitors should be placed in close proximity to the pins. A “quiet” ground
termination is desirable.
2009/07/17 Rev1.3
Champion Microelectronic Corporation
Page 5
CHAMP [ CHAMPION MICROELECTRONIC CORP. ]
