CHONGQING PINGYANG ELECTRONICS CO.,LTD.
1)
2)
Tested with pulses tp=20 ms.
Tolerance designation
—
The type numbers listed have zener voltage min/max limits as shown. Device tolerance of
±2%
are indicated by a
“B”
instead of a
“C”.
Zener voltage is measured with the device junction in thermal equilibrium at the
lead temperature of 30°C
±1°C
and 3/8, lead length.
3)
ZZT and ZZK are measured by dividing the ac voltage drop across the device by the ac current applied. The specified
limtis are for IZ(ac) = 0.1 IZ(dc) with the ac frequency = 1.0 kHz.
4)
This data was calculated using nominal voltages. The maximum current handling capability on a worst case basis is
limited by the actual zener voltage at the operating point and the power derating curve.
PDF
文件�½�用
"pdfFactory Pro"
试用版本创建