CLE230W, CLE231W, CLE232W
High Power Aluminum Gallium Arsenide IREDs
0.156 (3.96)
0.136 (3.45)
0.165 (4.19)
0.145 (3.68)
1.00 (25.4) min.
®
Clairex
July, 2001
Technologies, Inc
.
0.100 (2.54) dia.
0.215 (5.46)
0.205 (5.21)
ANODE
0.190 (4.83)
0.176 (4.47)
CATHODE
0.025 (0.64) max.
0.019 (0.48)
0.010 (0.25) max
0.016 (0.41)
0.147 (3.73)
0.137 (3.48)
ALL DIMENSIONS ARE IN INCHES (MILLIMETERS)
features
•
•
•
•
wide emission angle
TO-46 hermetically sealed package
excellent heat dissipation
high power output
absolute maximum ratings
(T
A
= 25°C unless otherwise stated)
description
The CLE230W series are AlGaAs
infrared emitting diodes mounted in
flat window TO-46 hermetic
packages. The wide emission angle
provides even illumination over a
large area. The series are spectrally
and mechanically matched to the
CLT130W phototransistor series. For
additional information, call Clairex.
storage temperature ...................................................................... -55°C to +150°C
operating temperature ................................................................... -55°C to +125°C
lead soldering temperature
(1)
......................................................................... 240°C
maximum continuous current
(2)
..................................................................... 100mA
peak forward current (10µs pulse width, 100pps) .............................................. 10A
maximum power dissipation
(3)
...................................................................... 200mW
reverse voltage .................................................................................................... 3V
1.
2.
3.
0.06” (1.5mm) from the header for 5 seconds maximum. Maximum
temperature can be 260°C if wave soldering.
Derate linearly 0.80mA/°C from 25°C free air temperature to T
A
= +125°C.
Derate linearly 1.6mW/°C from 25°C free air temperature to T
A
= +125°C.
notes:
electrical characteristics
(T
A
= 25°C unless otherwise noted)
symbol
parameter
Irradiance
(4,5)
E
e
V
F
I
R
λ
P
BW
Θ
HP
t
r
t
f
Forward voltage
Reverse current
Peak emission wavelength
Spectral bandwidth at half power points
Emission angle at half power points
Output rise time
Output fall time
(4,5)
min
CLE230W
CLE231W
CLE232W
1.5
3.5
5.0
-
-
-
-
-
-
-
typ
-
-
-
-
-
890
80
70
500
250
max
-
-
-
2.0
10
-
-
-
-
-
units
test conditions
mW/cm
V
µA
nm
nm
deg.
ns
ns
2
I
F
= 100mA
I
F
= 100mA
V
R
= 3.0V
I
F
= 100mA
I
F
= 100mA
I
F
= 100mA
I
F
= 100mA
I
F
= 100mA
note:
4. E
e
is a measure of irradiance (power/unit area) within a .25” (6.35mm) diameter area, centered on the
mechanical axis of the device and spaced .466” (11.8mm) from the lens side of the tab. This is
geometrically equivalent to a 30° cone.
5. Measurement taken at trailing edge of 100µs pulse with a duty cycle of 0.1%.
Clairex reserves the right to make changes at any time to improve design and to provide the best possible product.
Revised 12/01/04
Clairex Technologies, Inc.
Phone: 972-265-4900
1301 East Plano Parkway
Fax: 972-265-4949
Plano, Texas 75074-8524
www.clairex.com
CLAIREX [ CLAIREX TECHNOLOGIES, INC ]
