CMX605
Digital Line to
POTS Interface
D/605/6 July 2001
Provisional Issue
Features
•
Pre-Programmed Tone Generators
•
Fully Integrated DTMF Decoder/Encoder
•
SPM Generator
•
Simple Serial Control Interface
•
3.58MHz Xtal/Clock
•
V23/Bell 202 FSK Generator
•
Digital Ringing Voltage Generator
Applications
•
Digital Line to POTS Interface
•
Subscriber Terminal Adapters
•
Wireless Local Loop
•
Computer Telephony Integration
•
Telephone/Radio Patch Systems
•
Pair Gain Systems
•
Billing/SPM Systems
1.1
Brief Description
The CMX605 is an integrated telecom tone generator and DTMF encoder/decoder designed for ISDN
interfaces, Wireless Local Loop and Analogue to Digital Phone Conversion systems. The tone generator
covers an extensive range of pre-programmed tones used in analogue phone systems (POTS). Three
outputs are provided: ‘Ringing signals’, ‘In-band tones or FSK data’, and ‘12kHz/16kHz Metering pulses’.
Simple software control facilitates the interface to a wide range of commonly used µCs and SLICs,
enabling a comprehensive analogue telephone line presentation.
The DTMF encoder/decoder presents the digital line interface with DTMF dialling information received
from the telephone user and generates the appropriate DTMF tones for the POTS interface. DTMF tone
pairs can be encoded along with each tone singly or with other dual tone signals, such as those used in
CIDCW systems and ‘On Hook’ signalling systems.
Other tone standards supported are: Fax and Modem ‘answer’ and ‘originate’, ITU (CCITT) ‘R1’ and ‘R2’
signals, and sufficient tones for simple melody generation. Communication to and from the host
µController is performed by a ‘C-BUS’ serial interface, which is compatible with the ‘SPI’ interface.
©
2001 Consumer Microcircuits Limited
CMLMICRO [ CML MICROCIRCUITS ]
