THE CONNOR-WINFIELD CORP.
2111 COMPREHENSIVE DRIVE.
AURORA, IL 60505.
FAX (630) 851-5040.
PHONE (630) 851-4722.
www.conwin.com
PRODUCT
D AT A
SHEET
CRYSTAL CONTROLLED OSCILLATORS
ENVIRONMENTAL CHARACTERISTICS
Temperature Cycle: Per MIL-STD-883, Method 1010, Condition B. -55°C to 125°C, 20 cycles,10 minute dwell, 1m inute
transition.
SOLDERING
Pad Solderability: Per MIL-STD-883, Method 2003. 8 hour steam age prior to 245°C ±5°C Solder pot dip, 95%
Coverage.
Solder Reflow: The component solder internal to this device has a melt ing point of 221°C, the peak temperature insi de the
device should be less than or equal to 220°C for a maxim um of 10 seconds.
MECHANICAL CHARACTERISTICS
Vibration: Per MIL-STD-202, Method 204, Condition A. 10G’s peak, 10Hz to 500Hz, 15m inute cycles 12 times each
perpendicular axis.
Shock: Per MIL-STD-202, Method 213, Condition D. 500G’s, 1ms, half sine, 3 shocks per direction.
Moisture Resistance: Per MIL-STD-202, Method 106. 95% RH @ 65°C, 10 cycles 10°C to 65°C.
Pin
1
7
8
14
Connection
N/C
Ground (Case)
Output
Vcc
OUTPUT WAVEFORM
90%
50%
10%
SUGGESTED PAD LAYOUT
.330 max
(8.382mm)
Dimensional Tolerance:
±.005 (.127mm)
KEEP OUT AREA
.830
(21.08mm)
.565
(14.35mm)
CW
DATE CODE
ASOF3S3P
10.00M
Specifications subject to change without notice.
DATA SHEET #:
Cx059
PAGE
2
OF
2
REV:
03
DATE:
11/09/05
a
Copyright 2001 Connor-Winfield all rights reserved.
CONNOR-WINFIELD [ CONNOR-WINFIELD CORPORATION ]
