THE CONNOR-WINFIELD CORP.
2111 COMPREHENSIVE DRIVE.
AURORA, IL 60505.
FAX (630) 851-5040.
PHONE (630) 851-4722.
WWW.CONWIN.COM
PRODUCT
D AT A
SHEET
CRYSTAL CONTROLLED OSCILLATORS
Notes
1) Inclusive of calibration tolerance @ 25°C, frequency vs. temperature, frequency vs. change in supply voltage,
frequency vs. load variations, shock and vibration and 10 years aging.
2) When the oscillator is disabled, the true output is in a low state (Vol) and the complementary output is in the high
state (VoH).
3) Output must be terminated into 50 ohms to Vcc – 2V or Thevenin equivalent.
4) Duty Cycle measured at 1.977V
Output Waveform
Pin Connections
Pin
1
2
3
4
5
6
7
8
9
10
TABLE 7.0
Connection
N/C
Option Pin
N/C
Ground (Vee)
N/C
Option Pin
Q Output
N/C
+ Supply (Vcc)
N/C
Options Chart
(Replace the x with an option number)
TABLE 8.0
Option Number
0
1
2
Option Description:
Pin 2 and Pin 6: No Connection
Pin 6 Complementary Output, Pin 2 No Connection
Pin 2 Enable / Disable Function, Pin 6 No Connection
(Note: When oscillator is disabled the output, pin 7 is in a high
state (Voh).
Pin 2 Complementary Output, Pin 6 No Connection
Pin 2 Enable / Disable Function, Pin 6 Complementary Output
(Note: When oscillator is disabled the output pin 7 is in a high
state (Voh) and pin 6 is in a low state(Vol).
“1” LEVEL
“0” LEVEL
3
4
Dimensional Tolerance:
±.005” (.127mm)
Package Outline
Suggested Pad Layout
CW
0629
EE94-543G5
155.52M
Test Circuit
Temperature
225°C
Solder Profile
Ramp-Up Rate
3°C/second max.
from 150°C to 225°C.
225°C
tp
Ramp-Down Rate
6°C/second max.
Q
183°C
150°C
100°C
Q
Option
Pin
25°C
0
60-120s
Max.
360 Sec. Max.
10-30s
60-150s Max.
Time
Specifications subject to change without notice.
DATA SHEET #:
Ec230
PAGE
2
OF
2
REV:
01
DATE:
07/27/06
a
Copyright 2001 Connor-Winfield all rights reserved.