cpi
|
4cM300,000ga
4cW50,000J
4cM300,000ga
The 4CM300,000GA is a ceramic/metal, multi-
phase-cooled (water/vapor) power tetrode de-
signed to be used as an exact replacement for the
Thomson TH537. This tube has a thoriated tung-
sten mesh filament and pyrolytic graphite control
and screen grids for applications requiring high
dissipation combined with low secondary emis-
sion characteristics. Base coaxial contact rings
are provided for the filament, grid, and screen ter-
minals, and these terminals are cooled with forced
air. The maximum anode dissipation rating is 500
kilowatts steady state, with multiphase cooling.
chaRacteRistics
Plate Dissipation (Max.)
Screen Dissipation (Max.)
Grid Dissipation (Max.)
Frequency for Max. rating (CW)
Amplification Factor
Filament/Cathode
Voltage
Current
Capacitance
Input
Output
Feedthrough
Capacitance
Input
Output
Feedthrough
Cooling
Base
Air Socket
Air Chimney
Boiler
Length
Diameter
Weight
300,000 Watts
5,000 Watts
2,000 Watts
50 MHz
4.3
Thoriated Tungsten
18.0 Volts
430 Amps
Grounded Cathode
820 pf
80.0 pf
4.5 pf
Grounded Grid
340 pf
81.0 pf
0.8 pf
Water and Forced Air
Special Coaxial
SK-2453
N/A
N/A
22.0 in; 56.0 cm
12.30 in; 31.1 cm
125 lb; 57 kg
MaxiMuM Ratings
class of
Operation
c
type of service
plate
Voltage
(Volts)
13,000
plate
current
(amps)
50.0
plate
Voltage
(Volts)
11,000
typical OpeRatiOn
screen
Voltage
(Volts)
1,000
plate
current
(amps)
36.0
Drive
Output
power
power
(Watts) (kiloWatts)
2,400
300.0
RF amplifier plate Modulated
The values listed above represent specified limits for the product and are subject to change. The data should be used for basic
information only. Formal, controlled specifications may be obtained from CPI for use in equipment design.
For information
on this and other CPI MPP products, visit our website at:
www.cpii.com,
or contact: CPI Microwave Products Division, Eimac Operation,607 Hansen Way, Palo Alto, CA 94303
telephone
:
1(800) 414-8823.
fax
:
(650) 592-9988 |
email
:
powergrid@cpii.com