cpi
|
4cpW10,000R/ 9016
cpi | 4cW50,000J
4cpW10,000R/9016
The 4CPW10,000R/9016 is intended for use as a
pulse modulator or regulator for use with magne-
trons, crossed field amplifiers, TWTs, klystrons,
and other RF power sources. The inherent con-
stant current characteristic of this tetrode is well
suited for series switching of plasma discharge
devices, electron beam welding equipment , etc.
The rugged construction of this tube allows it to
be used under demanding vibration and shock
conditions. The holdoff voltage rating is 25 kVdc in
pulse modulator or regulator service, with a peak
anode current of 24 amperes.
chaRacteRistics
Plate Dissipation (Max.)
Screen Dissipation (Max.)
Grid Dissipation (Max.)
Frequency for Max. rating (CW)
Amplification Factor
Filament/Cathode
Voltage
Current
Capacitance
Input
Output
Feedthrough
Capacitance
Input
Output
Feedthrough
Cooling
Base
Air Socket
Air Chimney
Boiler
Length
Diameter
Weight
10,000 Watts
250 Watts
75 Watts
--- MHz
4.5
Thoriated Tungsten
7.5 Volts
75 Amps
Grounded Cathode
115 pf
20.0 pf
0.7 pf
---
--- pf
--- pf
--- pf
Water and Forced Air
Coaxial
SK-300A
---
---
11.44 in; 29.06
4.66 in; 11.84
7.5 lb; 3.4
type of service
MaxiMuM Ratings
plate
Voltage
(Volts)
25,000
plate
current
(amps)
24.0
ypical OpeRatiOn
t
plate
current
(amps)
20.0
Drive
Output
power power
(Watts) (kiloWatts)
---
370.0
class of
Operation
---
plate
screen
Voltage Voltage
(Volts)
(Volts)
20,000
1,250
switch tube or pulse modulator
The values listed above represent specified limits for the product and are subject to change. The data should be used for basic
information only. Formal, controlled specifications may be obtained from CPI for use in equipment design.
For information on
this and other CPI products, visit our website at: www.cpii.com,
or contact: CPI MPP Division, Eimac Operations, 607 Hansen Way, Palo Alto, CA 94303
telephone
:
1(800) 414-8823.
fax
:
(650) 592-9988 |
email
:
powergrid@cpii.com
CPI [ COMMUNICATIONS & POWER INDUSTRIES, INC. ]
