CLD-AP90 Rev 0
Soldering & handling
Cree Xlamp XB-d leds
®
®
inTroduCTion
This application note applies to XLamp XB-D LeDs
which have order codes in the following format.
XBDxxx-xx-xxxx-xxxxxxxxx
This application note explains how XLamp XB-D LeDs
and assemblies containing these LeDs should be
handled during manufacturing. Please read the entire
document to understand how to properly handle
XLamp XB-D LeDs.
TaBle of ConTenTS
WWW.CRee.COM/XLAMP
Copyright © 2012 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the
Cree logo and XLamp are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not
a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com.
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
www.cree.com/xlamp