INPUT SPECIFICATIONS (1)
Description
Control Voltage Range
Minimum Turn On Voltage
Minimum Turn-Off Voltage
Typical Input Current @ Nominal Voltage
Nominal Input Impedance
Maximum Turn-On Time [msec]
Maximum Turn-Off Time [msec]
4-10 VDC
4.0 VDC
1.0 VDC
15 mAdc
270 Ohm
1/2 Cycle
1/2 Cycle
20-28 VDC
20 VDC
1.0 VDC
15 mAdc
1500 Ohm
1/2 Cycle
1/2 Cycle
GENERAL SPECIFICATIONS
Description
Dielectric Strength, Input/Output/Base (50/60Hz)
Minimum Insulation Resistance (@ 500 VDC)
Maximum Capacitance, Input/Output
Ambient Operating Temperature Range
Ambient Storage Temperature Range
Weight (typical)
Encapsulation
Parameters
2500 Vrms
10
9
Ohm
10pF
-30 to 80°C
-30 to 125°C
0.6 oz. (17g)
Therminally Conductive Epoxy
GENERAL NOTES
1) All parameters at 25°C unless otherwise specified.
2) Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1
3) See current derating curve.
MECHANICAL SPECIFICATIONS
PIN 1: AC LOAD
PIN 2: AC LOAD
PIN 3: + DC CONTROL
PIN 4: -DC CONTROL
N otes:
1.-Tolerances are ±0.02" (0.5mm) unless otherwise stated.
2.-All pin dimensions are from center of pin
UL E116950
CSA LR816889
TUV E2072777
Rev. 071608
THERMAL DERATE INFORMATION
For Contact information visit our web
site.
www.crydom.com
©2008 Crydom, Inc.
Specifications subject to change without notice.
CRYDOM [ CRYDOM INC., ]
