Con tact
•
Lead-in on contact
helps align the conductor
with the IDC slot.
•
Patented, offset tines
produce Torq-Tite™
termination for added
reliability.
•
Long cantilever
produces less angular
deflection as PC board
is inserted.
•
Contact with the PC
board is made near the
face of the connector for
increased wiping action.
•
Unsupported contact tail
allows for self-adjustment
to compensate for PC board
irregularities.
Car d Edge Con n ector Featur es
•
10, 20, 26, 34, 40, and 50 contact versions.
•
Compatible with various PC board thicknesses, from .032 in. to
.070 in. thick.
•
Standard gold-plated phosphor bronze contacts; tin-lead plated
contacts optional.
•
Can be daisy-chained or applied in cable end terminations.
•
Factory pre-assembled cover minimizes assembly time.
•
Available with or without mounting flanges.
•
Dependable long cantilever contact design maintains consistent
pressure even after repeated matings with PC boards. Insures a
long insertion/withdrawal cycle life and a good self-cleaning wipe
on each PC board pad.
•
Self-adjusting contact compensates for variations in PC board
thickness.
•
Closed entry protection prevents possible damage caused by PC
board irregularities.
Card Edge Connectors
Str ain Relief
Strain relief is an integral part of CW Card Edge connector. A
strain relief lip is molded into the connector body. Upon installation
of the cover, this lip causes a strain relief bend in the cable that
prevents forces applied to the cable from being transferred to the
IDC termination.
Polar ization
Positive polarization is available on all CW card edge connectors.
A polarizing key, inserted into a V-slot located between any two
contacts, fits into a corresponding .037 in. slot cut into the PC
board. This technique not only provides positive polarization
without loss of a contact position, but also helps ensure precise
alignment of the contacts to the PC board’s pads.
Assembly
Assembling these connectors is both fast and easy using only a
simple bench press. The connector body is designed to orient the
cable to the contact tines, and the factory preassembled cover
permits termination of all conductors in one step–simply apply
opposing parallel forces on the connector cover and base.
•
130 James Way, Southampton, PA 18966 - 3838
•
Telephone: (215) 355-7080
•
Fax: (215) 355-1088
•
www.cwind.com
27
CWIND [ CW INDUSTRIES ]
